Tag Archives: screw manufacturer

China Standard 2021 New High Efficiency (30% Energy Saving) Single Screw Air Compressor 100% Oil-Free Low Pressure Compressors 5.5kw 7-13 Bar manufacturer

Product Description

Lead Time

Product Description

TROGD-5.5F 5.5KW 7.4HP Stationary Screw Air Compressor     

Specifications
 

Model TRLGD-5.5F
Capacity & Pressure          (m3/min)(Mpa) 0.85/0.7  
0.78/0.8
0.65/0.1.0
0.55/1.2
0.48/1.3
Electromotor Power (Kw) 5.5
Power (Hp) 7.4
Logon mode Direct starting
Voltage (v) 380/50HZ( SpeciTR Requirement can be produced)
Connecting type between    air compressor and motor Belt driven
Oil content (ppm) ≤ 2
Size(L*W*H mm) 8.4) optimized design, large rotor, low rotary speed (within 3000r/min), without the gearbox.

direct connection drive, it has a lower rotary speed and longer life compared with dry oil-free screw air compressor(10000r/min-20000r/min).

12. Automatic Cleaning System

The function of automatic water exchange and automatic system cleaning can be realized, and the interior of the compressor is more clean and sanitary.
 

Introduction

Company Information

Package Delivery

 

BACK HOME

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type
Installation Type: Stationary Type
Type: Single Screw Compressor
Samples:
US$ 100000/Piece
1 Piece(Min.Order)

|
Request Sample

air compressor

Can Water-Lubricated Air Compressors Be Used in Cold Climates?

Water-lubricated air compressors can be used in cold climates, but there are certain considerations and precautions to keep in mind. Here’s a detailed explanation of using water-lubricated air compressors in cold climates:

Freezing of Water:

  • Potential for Freezing: In cold climates, the water used for lubrication in water-lubricated compressors can freeze, which can cause operational issues and damage to the equipment. Freezing can occur in the water supply lines, lubrication system, or water jackets if the temperature drops below the freezing point of water.
  • Water Temperature: It is important to ensure that the water temperature remains above freezing throughout the compressor system. This can be achieved by using insulation, heat tracing, or heaters to maintain adequate water temperature. Monitoring the water temperature and implementing appropriate heating measures are crucial to prevent freezing-related problems.

Protection and Insulation:

  • Protecting External Components: External components of water-lubricated compressors, such as valves, fittings, and pipes, may be exposed to cold temperatures. Insulating these components can help prevent freezing and ensure their proper functioning. Insulation materials, such as foam wraps or heat tapes, can be used to provide thermal protection.
  • Water Supply Lines: Water supply lines that feed the compressor should be properly insulated and protected from freezing temperatures. Insulation can help maintain the water temperature and prevent freezing within the supply lines. Additionally, measures such as burying the supply lines below the frost line or using heat tracing cables can offer further protection against freezing.

Alternative Lubrication Methods:

  • Oil-Lubricated Compressors: In extremely cold climates, where freezing is a significant concern, using oil-lubricated compressors instead of water-lubricated ones may be a more practical option. Oil-based lubrication systems are less prone to freezing and can provide reliable operation in colder temperatures. However, it is important to consider the specific requirements and limitations of oil-lubricated compressors for the intended application.

Manufacturer Recommendations:

  • Consulting the Manufacturer: It is crucial to consult the manufacturer’s guidelines and recommendations regarding the use of water-lubricated compressors in cold climates. Manufacturers may provide specific instructions, modifications, or alternative solutions to ensure the safe and efficient operation of their equipment under cold weather conditions.

By implementing proper insulation, heating measures, and following the manufacturer’s guidance, water-lubricated air compressors can be used effectively in cold climates. It is important to assess the specific requirements of the application and consider the potential challenges associated with freezing temperatures to ensure the reliable and safe operation of the water-lubricated compressor system.

air compressor

How Are Water-Lubricated Air Compressors Used in Automotive Applications?

Water-lubricated air compressors find various applications in the automotive industry. Here’s a detailed explanation of how they are used in automotive applications:

Tire Inflation:

  • Service Stations: Water-lubricated air compressors are commonly used in automotive service stations for tire inflation. They provide a reliable source of compressed air for quickly and efficiently inflating tires to the recommended pressure. The water lubrication system in these compressors helps to reduce friction and wear on internal components, ensuring smooth operation and extended lifespan.
  • Tire Shops: Tire shops often utilize water-lubricated air compressors as part of their tire service equipment. These compressors can supply compressed air for tire inflation, tire mounting and demounting machines, and other pneumatic tools used in tire service and maintenance.

Painting and Finishing:

  • Spray Painting: Water-lubricated air compressors are also used in automotive painting and finishing processes. Compressed air is used to power spray guns that apply paint or coatings to vehicles during the painting process. The water lubrication system helps maintain the cleanliness of the compressor and prevents oil contamination, ensuring high-quality paint finishes.
  • Sanding and Polishing: Compressed air is often used for sanding and polishing automotive surfaces. Water-lubricated air compressors provide a reliable source of compressed air for pneumatic sanders, polishers, and other air-powered tools used in automotive surface preparation and refinishing.

Brake and Suspension Systems:

  • Brake Bleeding: Water-lubricated air compressors can be used during brake bleeding procedures in automotive repair and maintenance. Compressed air is used to purge air bubbles from the brake system, ensuring optimal brake performance and pedal feel. The water lubrication system helps maintain the purity of the compressed air, preventing contamination that could affect the brake system’s functionality.
  • Suspension Systems: Air suspension systems in vehicles often rely on compressed air for operation. Water-lubricated air compressors provide a continuous supply of clean and lubricated compressed air for inflating and maintaining the air springs or airbags used in vehicle suspensions.

Diagnostic and Testing Equipment:

  • Diagnostic Tools: Water-lubricated air compressors are utilized in automotive diagnostic and testing equipment. Compressed air is used to operate pneumatic diagnostic tools, such as vacuum testers, pressure gauges, and leak detectors, that help diagnose and troubleshoot various vehicle systems.
  • Testing and Calibration: Automotive testing and calibration equipment, such as dynamometers and emission testing devices, often require a source of compressed air. Water-lubricated air compressors supply the necessary compressed air for precise and accurate testing of vehicle performance, emissions, and other parameters.

Overall, water-lubricated air compressors play a significant role in various automotive applications, including tire inflation, painting and finishing, brake and suspension systems, and diagnostic and testing equipment. Their use helps ensure efficient and reliable operation, improved productivity, and high-quality results in automotive service, repair, and manufacturing processes.

air compressor

How Is Water Quality Crucial for the Performance of These Compressors?

Water quality plays a crucial role in the performance of water-lubricated air compressors. The quality of the water used for lubrication directly impacts the efficiency, reliability, and lifespan of these compressors. Here are the key reasons why water quality is essential for optimal compressor performance:

  1. Lubrication effectiveness: Water serves as the lubricant in water-lubricated air compressors. The water forms a protective film between moving parts, reducing friction and wear. However, if the water contains impurities or contaminants, it can compromise the lubricating properties. Impurities like minerals, sediments, or dissolved solids can hinder the formation of an effective lubricating film, leading to increased friction and potential damage to the compressor components.
  2. Corrosion prevention: Water with high mineral content, such as hard water, can promote corrosion within the compressor system. Minerals like calcium and magnesium can react with metal surfaces, leading to rust, scale formation, and degradation of internal components. Corrosion compromises the structural integrity of the compressor, reduces its efficiency, and may result in costly repairs or even premature failure.
  3. Preventing blockages: Poor water quality can result in the accumulation of sediments, debris, or contaminants within the compressor system. These deposits can block water passages, filters, or valves, impeding the flow of water and affecting the overall performance of the compressor. Restricted water flow may lead to inadequate cooling, reduced lubrication, and compromised efficiency.
  4. Preventing fouling and fouling-related issues: Fouling refers to the accumulation of organic or inorganic deposits on heat transfer surfaces, such as heat exchangers or radiators, within the compressor system. Poor water quality can contribute to fouling, reducing heat transfer efficiency and impairing the cooling capacity of the compressor. This can result in elevated operating temperatures, decreased performance, and potential damage to the compressor.
  5. System cleanliness: Clean water is crucial for maintaining a clean and sanitary compressor system, especially in industries like food and beverage or medical applications. Contaminated water can introduce harmful bacteria, microorganisms, or particles into the compressor, posing a risk to product quality, safety, or patient well-being.

To ensure optimal performance and longevity of water-lubricated air compressors, it is important to monitor and maintain the quality of the water used for lubrication. Regular water analysis, proper filtration, and appropriate water treatment measures should be employed to remove impurities, control mineral content, and maintain the desired water quality. By ensuring clean and high-quality water, the compressor can operate efficiently, minimize the risk of component damage, and contribute to a reliable and safe compressed air system.

China Standard 2021 New High Efficiency (30% Energy Saving) Single Screw Air Compressor 100% Oil-Free Low Pressure Compressors 5.5kw 7-13 Bar   manufacturer China Standard 2021 New High Efficiency (30% Energy Saving) Single Screw Air Compressor 100% Oil-Free Low Pressure Compressors 5.5kw 7-13 Bar   manufacturer
editor by CX 2024-05-17

China Custom 14.5bar Portable Air Compressor Industrial High Quality Oil Free Air Tank Screw Air Compressor manufacturer

Product Description

Product Description

This series of products are designed for engineering mine required Φ115mm hole drill, bolt drill, shotcrete machine and all kinds of air source;

The whole series of products adopt IP55 motor.

 

Main technical specifications

  

Model  Rated FAD  Rated Pressure  Motor Power  Air End  Motor Protection Class  Weight  Type
90SDY+-8S 15.5 rrP/min 8 bar 90 kW  Single Stage Compression IP55 2,125 kg 4 wheel
90SDY+-14.5 13 m3/min 14.5 bar 90 kW  Single Stage Compression IP55 2,145 kg 2 wheel
90SDY+-14.5S 13 m3/min 14.5 bar 90 kW  Single Stage Compression IP55 2,120 kg 4 wheel
90SDY+-17 13 m3/min 17 bar 90 kW  Two Stage Compression IP55 2,600 kg 4 wheel

 

 

Detailed Photos

 

Packaging & Shipping

 

 

Company Profile

HangZhou CHINAMFG Drilling Equipment Co., Ltd. mainly provides holistic drilling solutions, serving the mining, stone crushing, water conservancy drilling industry, to help you solve the problem of drilling at high efficiency and low cost. We mainly provide mobile air compressors, drilling rigs, hammer, drill bit, crushers, underground water detector.We are your trustworthy partner.

 

FAQ

1. How can I make payment?
A: You can pay directly online on Alibaba with credit card, or TT, Western Union, LC etc.
2. How long is the guarantee of your products?
A: We offer 6 months guarantee for machines and drilling tools, 1 year guarantee for equipment. For any problem occurs during guarantee, we will exchange new products or spare parts accordingly. We will still offer after sale service after the guarantee at very low cost.
3. How is the shipment? How long dose it take?
A: For large quantity or heavy products, we ship by sea shipping or land shipping. Shipping efficiency depends on country and city you want to ship to. For small and delicate products, we ship by DHL, UPS, Fedex or TNT. Air shipping is faster, generally speaking, Asian countries will take 3 to 5 days, other countries 7-15 days. You can also appoint shipping method you like before we ship.
4. How is your quality control?
A: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out.
5. Do you have any certificate of authorization?
A: Our company have ISO certificate.Our machinery is CE certified, drill equipment have ISO9001 certificate.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Support
Application: Intermediate Back Pressure Type
Performance: Low Noise, Explosion-Proof
Mute: Not Mute
Lubrication Style: Lubricated
Drive Mode: Electric
Customization:
Available

|

air compressor

Are There Specific Water Treatment Requirements for Water-Lubricated Compressors?

Water-lubricated compressors often have specific water treatment requirements to ensure optimal performance, prevent equipment damage, and maintain the desired water quality. Here’s a detailed explanation of the water treatment considerations for water-lubricated compressors:

Water Quality:

  • Purity: The water used for lubrication should be clean and free from impurities, contaminants, or excessive minerals. Impurities in the water can lead to corrosion, blockages, and reduced lubrication effectiveness. Water sources should be evaluated to ensure they meet the required purity standards.
  • Chemical Composition: The chemical composition of the water should be within acceptable limits to avoid any adverse reactions with compressor components or lubricants. Certain water characteristics, such as pH, alkalinity, hardness, and conductivity, need to be monitored and controlled to prevent issues like scaling, fouling, or chemical reactions.

Water Treatment Methods:

  • Filtration: Filtration systems are commonly used to remove particulate matter, sediment, or debris from the water. Filters can range from simple strainers to more advanced filtration systems, depending on the specific water quality requirements and the level of filtration needed.
  • Water Softening: If the water has high levels of hardness minerals, such as calcium and magnesium, water softening methods may be necessary. Water softeners use ion exchange or other processes to remove the hardness minerals, which can help prevent scaling and reduce the risk of deposits in the compressor system.
  • Reverse Osmosis (RO): Reverse osmosis is a water treatment method that uses a semi-permeable membrane to remove dissolved solids, ions, and impurities from the water. RO systems can effectively reduce the total dissolved solids (TDS) and improve the overall water quality, making it suitable for water-lubricated compressors.
  • Chemical Treatment: In some cases, chemical treatments may be required to control water chemistry parameters, such as pH or alkalinity. Chemical additives can be used to adjust or stabilize water chemistry within the desired range, preventing corrosion, scaling, or other issues.

Water treatment requirements for water-lubricated compressors can vary depending on factors such as the compressor design, operating conditions, water source quality, and specific application requirements. It is essential to consult the compressor manufacturer’s recommendations and guidelines regarding water treatment. The manufacturer’s guidelines will provide specific information on water quality limits, treatment methods, and any required maintenance procedures related to water treatment.

Regular monitoring of water quality, including periodic testing and analysis, is recommended to ensure that the water treatment measures are effective and the desired water quality is maintained. Water treatment systems should be properly maintained and periodically serviced to ensure their optimal performance and prevent any potential issues that could affect the operation and longevity of water-lubricated compressors.

air compressor

Are There Regulations Governing the Use of Water-Lubricated Air Compressors?

When it comes to the use of water-lubricated air compressors, there are several regulations and standards that govern their operation and ensure compliance with safety, environmental, and performance requirements. Here’s a detailed explanation of the regulations related to water-lubricated air compressors:

1. Occupational Safety and Health Administration (OSHA) Regulations:

OSHA is a regulatory agency in the United States that sets and enforces workplace safety and health standards. While OSHA does not have specific regulations solely dedicated to water-lubricated air compressors, they have general regulations that apply to all types of air compressors. These regulations include requirements for safe operation, maintenance, and guarding of equipment to protect workers from hazards such as electrical shocks, mechanical injuries, and exposure to hazardous substances.

2. Environmental Protection Agency (EPA) Regulations:

The EPA is responsible for implementing and enforcing environmental regulations in the United States. Although there are no specific regulations for water-lubricated air compressors, the EPA has regulations that govern the discharge of water and other substances into the environment. If the water-lubricated compressor system involves the use of cooling water or generates wastewater, it may be subject to regulations related to water pollution control, water treatment, and proper disposal of wastewater.

3. International Organization for Standardization (ISO) Standards:

The ISO develops international standards that provide guidelines and requirements for various industries and technologies. ISO 8573 is a standard that addresses the quality of compressed air used in different applications. This standard sets limits and specifications for various contaminants in compressed air, including water content. Water-lubricated air compressors need to comply with the requirements of ISO 8573 to ensure the produced compressed air meets the desired quality standards.

4. Manufacturer Guidelines and Recommendations:

In addition to regulatory requirements, it is essential to follow the guidelines and recommendations provided by the manufacturers of water-lubricated air compressors. Manufacturers typically provide instructions for installation, operation, maintenance, and safety precautions specific to their equipment. Adhering to these guidelines is crucial to ensure the safe and proper functioning of the equipment and to maintain warranty coverage.

It’s important to note that the specific regulations and standards governing water-lubricated air compressors may vary depending on the country or region. Therefore, it is advisable to consult the relevant regulatory agencies, industry organizations, and local authorities to ensure compliance with applicable regulations and standards in a particular jurisdiction.

By complying with the relevant regulations, standards, and manufacturer guidelines, users of water-lubricated air compressors can ensure the safe and efficient operation of their equipment while minimizing any potential environmental impacts.

air compressor

Are There Any Downsides to Using Water-Lubricated Air Compressors?

While water-lubricated air compressors offer several advantages, there are also some downsides to consider when using this type of compressor. Here are a few potential drawbacks associated with water-lubricated air compressors:

  1. Water quality requirements: Water-lubricated compressors are highly dependent on the quality of the water used for lubrication. The water should be free from contaminants, minerals, and impurities that can affect the compressor’s performance or cause corrosion. Ensuring the consistent availability of high-quality water may require additional filtration or treatment processes, which can add complexity and cost to the system.
  2. Increased maintenance: Compared to oil-lubricated compressors, water-lubricated models may require more frequent maintenance. Regular checks, cleaning, and monitoring of the water system are necessary to prevent blockages, maintain proper water flow, and ensure the cleanliness of the compressor. This increased maintenance requirement can result in higher operational costs and more downtime for maintenance activities.
  3. Potential for corrosion: While water itself is not corrosive, certain water conditions, such as high mineral content or low pH levels, can promote corrosion within the compressor system. Corrosion can lead to component damage, reduced efficiency, and the need for repairs or replacements. Implementing corrosion prevention measures, such as water treatment or the use of corrosion-resistant materials, may be necessary to mitigate this risk.
  4. Compatibility limitations: Water-lubricated compressors may have limitations when it comes to compatibility with certain materials or gases. For example, in applications where the compressed air comes into contact with sensitive materials or requires specific gas purity, the use of water as a lubricant may not be suitable. In such cases, alternative lubrication methods or compressor types may be more appropriate.
  5. Environmental considerations: While water is generally considered environmentally friendly, the disposal of used water from the compressor system may require proper wastewater management. Depending on local regulations and requirements, additional steps may be needed to ensure compliant and environmentally responsible disposal of the water used for lubrication.

Despite these potential downsides, water-lubricated air compressors continue to be used in various industries and applications due to their specific advantages and suitability for certain environments. It is important to carefully evaluate the specific requirements, operating conditions, and maintenance considerations of a given application to determine whether a water-lubricated compressor is the most suitable choice.

China Custom 14.5bar Portable Air Compressor Industrial High Quality Oil Free Air Tank Screw Air Compressor   manufacturer China Custom 14.5bar Portable Air Compressor Industrial High Quality Oil Free Air Tank Screw Air Compressor   manufacturer
editor by CX 2024-05-09

China factory 10HP Permanent Magnet Frequency Conversion Rotary Screw Air Compressor manufacturer

Product Description

Technical Specifications Of Screw Air Compressor:

     Permanent Magnet Frequency Conversion Rotary Screw Air Compressor 
10HP-20HP with Air Dryer and Tank
Item  Parameters Parameters Parameters
Model  TPM-10AS TPM-15AS TPM-20AS
Rated Working Pressure (MPa)  0.6-0.8/1.0/1.2 0.6-0.8/1.0/1.2 0.6-0.8/1.0/1.2
Rated capacity (m3/min) adjust scope by inverter 0.54-1.35/0.41-1.03/0.33-0.83 0.72-1.8/0.54-1.34/0.41-1.03 1.04-2.6/0.83-2.07/0.7-1.76
Cooling method  Air cooling Air cooling Air cooling
Maximum ambient temperature(ºC)  45ºC 45ºC 45ºC
Compression stage  Single stage  Single stage  Single stage 
Exhaust oil content  ≤3 ppm ≤3 ppm ≤3 ppm
Noise level dB(A)  ≤63 ≤63 ≤63
Air outlet size  G3/4 G3/4 G1
Driven method  Direct coupling Direct coupling Direct coupling
Lubricating oil quantity (Liter)  4 9 9
Voltage/Hertz(V/HZ)  380V/50HZ/60HZ 380V/50HZ/60HZ 380V/50HZ/60HZ
Permanent magnet variable speed motor  Model      
Rate power( HP/KW) 10/7.5 15/11 15/11
Voltage/Hertz(V/HZ)  380V/50HZ/60HZ 380V/50HZ/60HZ 380V/50HZ/60HZ
variable Speed (rpm) 1500-2950 1500-2950 1500-2950
Starting method Frequency conversion start Frequency conversion start Frequency conversion start
Insulation class F F F
Service factor 1.2 1.2 1.2
Air receiver tank  Capacity  (Liter)  400 400 400
Design pressure  (MPa) 1 1 1
Air dryer Voltage/Hertz(V/HZ) AC220V/50Hz AC220V/50Hz AC220V/50Hz
Power( kW) 0.3 0.45 0.5
Pressure dew point ( ºC)  2-10  2-10  2-10
Capacity (m3/min) 1.6 2.6 2.6
High efficiency filter Capacity( Nm3/min) 1.6 2.6 2.6
Rated working pressure( MPa) 1 1 1
Particle content(μm) 0.01um 0.01um 0.01um
Oil content (ppm) 0.001ppm 0.001ppm 0.001ppm
  filter quantity and class 4pcs and CTAH class 4pcs and CTAH class 4pcs and CTAH class
drain water   automatic automatic automatic
Dimension L ×W×H  (mm) 1700×750×1550 1700×750×1661 1700×750×1661
Weight(kg) 450 550 600
 
PRICE QUOTATION TPM-10AS TPM-15AS TPM-20AS
EXW 2100USD 2500USD 2750USD
FOB ZheJiang 2250USD 2650USD 2900USD
QUALITY GUARANTEE FOR WHOLEMOACHINE 12MONTHS SINCE DELIVERY 12MONTHS SINCE DELIVERY 12MONTHS SINCE DELIVERY
PAYMENT : LESS 3000USD, 100% IN ADVANCE, MORE 3000USD ,30% IN ADVANCE ,70% BEFORE SHIPPMENT
  OR LC AT SIGHT FOR MORE THAN 20000USD

 Technical performance of core components:  

  1).  Screw host  
Screw main machine adopts Germany’s latest line technology main machine, large head and low speed.  optimized  Line design, high precision grinding tooth shape, less internal leakage, with high efficiency, low consumption, low noise  Sound and high reliability features.  Large head low speed;  Using the third generation of asymmetric tooth type 5:6  Keep 0.003 inch clearance between rotors and never wear out.  greatly prolong the life of the main engine.  “This machine can run continuously for 365 days”.   
2).  The motor  
Jiangtian, Saifu, Zhongyan, high efficiency air cooled fully enclosed motor, protection class IP23 Insulation grade F pole, continuous trouble-free long-term operation, grease  
Long lubrication life, low noise, large starting torque.  
3). Intake valve  
Advanced input-check, combined structure, no exhaust check valve, can effectively prevent,Pour oil while stopping.  The configuration of pressure regulating valve can automatically achieve 0-100% stepless regulation, control cylinder life,Life up to 3 million times, reduce operating costs, gas output stability, the host life greatly improved.  
4)  Oil-gas separator  
Vertical structure, centrifugal, gravity, fine 3 efficient separation, deep filtration, imported filtration (ZheJiang Puluo), oil content is only 1-2ppm   
5)  Oil filter  
Using imported rotary oil filter, internal bypass valve, to ensure that the oil road is not blocked  
Effectively filter impurities in lubricating oil, oil deterioration, filtration accuracy of 0.1 micron, effectively protect the main  
Normal operation.  It is very convenient to replace, and can be replaced in a minute.
6)  Air filter  
High precision imported precision filter can ensure the normal operation of the compressor in the dust environment  
7)  Transmission device  
German famous brand – opening coupling, transmission torque, transmission efficiency 99.8% or more  
8)Exhaust temperature;  
With no scaling, corrosion resistance and other characteristics, greatly convenient for users to the maintenance of the cooler, cooler heat dissipation area is more uniform  
 9). Temperature control valve  
High sensitivity spool, automatic control and adjustment into the engine oil temperature, so as to control the exhaust temperature in a certain temperature range, can prevent the compressed air water precipitation.  
10). Minimum pressure valve  
The world famous brand (VMC), the use of pressure loss is only 0.015mpa non-metal double cone sensitive valve design structure, open and close quickly, sensitive, reliable, can ensure the pressure required for oil circulation in the compression system,  
And stop the gas from flowing back.  
11). Microcomputer display controller  
Automatic intelligent operation, Chinese (English) display, touch button, easy to operate, without special training;  Can display and deal with all kinds of on-site faults;  The operation state is clear at a glance, and it can be unattended for 24 hours. It can realize multi-machine communication with the computer, and linkage communication between air compressors can be realized.  
Technical performance of core components  

 
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Internet Instruction
Warranty: 1 One Year
Lubrication Style: Lubricated
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can air compressors be used for gas compression and storage?

Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:

Gas Compression:

Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.

Gas Storage:

Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.

Gas Types:

While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:

  • Nitrogen
  • Oxygen
  • Hydrogen
  • Carbon dioxide
  • Natural gas
  • Refrigerant gases

It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.

By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.

air compressor

How are air compressors employed in the mining industry?

Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

1. Exploration and Drilling:

Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

2. Ventilation and Air Quality Control:

Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

3. Material Conveyance:

In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

4. Dust Suppression:

Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

5. Instrumentation and Control:

Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

6. Explosive Applications:

In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

7. Maintenance and Repair:

Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

China factory 10HP Permanent Magnet Frequency Conversion Rotary Screw Air Compressor   manufacturer China factory 10HP Permanent Magnet Frequency Conversion Rotary Screw Air Compressor   manufacturer
editor by CX 2024-04-25

China Good quality Low Noise Oil Free Screw Type Air Compressors for Medical Industry / Oxygen manufacturer

Product Description

Low Noise Oil Free Screw Type Air Compressors for Medical Industry / Oxygen

The ETC oil-free conversion technology opens up completely new possibilities for providing oil free compressed air in meeting with ISO 8573-1 Class 0 quality standard.

When it comes to holding down up-front operational costs, converter technology is ideally suited for the provision of entirely oil free compressed air. And it is dependable too: Penetration of oil into the compressed air network is absolutely impossible!

Operating costs are extremely low because no costly checkups are required. Commonly occurring risks such as oil penetration have been discarded, and frequent replacement of component elements as with filters has been completely eliminated.

Features of CHINAMFG ETC Series Oil Free Rotary Screw Air Compressor
1. Air quality to ISO8573-1 Class 0 standard with TUV certificate on request

2. Proven Eco-Tec Oil Free Converter technology from Germany and over thousands successful installation reference CHINAMFG

3. Single stage airend design for easy and cost saving maintenance
4. T. E. F. C. IP55 class F electric motor in compliance with IEC/DIN standards
5. Modern concept suction valve with energy saving modulation control as option
6. Intelligent PLC control panel with sequential / remote control functions
7. Reliable automatic control box with “Siemens” contactors
8. High efficiency aftercooler (air- or water- cooled available)

Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air. 

The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment. 

Oil/hydrogen concentration is below 0,0571 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential. 

ADEKOM (ASIA PACIFIC) LIMITED founded in the late 90’s is a specialized air/gas compressors and treatment system manufacturer with headquarter in Hong Kong. Its partners located in Vicenza, Italy and Germering, Germany are the world’s leading manufacturers with global recognition and experience in designing, manufacturing and marketing of rotary screw air/gas compressors for decades. QUALITY, RELIABILITY and ENERGY EFFICIENCY have been the main objectives of serving customers all over the world. CHINAMFG follows the company core of its European partners, is committed to the research & development, quality assurance and satisfaction of customers’ needs. Today, what CHINAMFG can do is not just to supply the best products to the market, but to provide THE TOTAL SOLUTION TO YOUR NEEDS!

CONTACT US

Asia Pacific Market: Spencer Lau (Ms.)
 
European/ Middle Eastern/ African Market: Echo Lok (Ms.)
 
American Market: Alice Kwok (Ms.)
 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Yes
Warranty: 12 Months
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Customization:
Available

|

air compressor

Can Water-Lubricated Compressors Be Used in High-Pressure Applications?

Water-lubricated compressors can be used in high-pressure applications, but there are certain considerations and limitations to keep in mind. Here’s a detailed explanation:

Water-lubricated compressors are typically designed for lower to medium-pressure ranges. They are commonly used in applications where the required discharge pressure does not exceed a certain threshold, typically up to a few hundred pounds per square inch (psi). However, there are specialized water-lubricated compressors available that can handle higher pressures, depending on the specific design and construction.

The ability of a water-lubricated compressor to operate at high pressures depends on several factors:

  1. Compressor Design: The design and construction of the compressor play a crucial role in determining its maximum pressure rating. Compressors designed for high-pressure applications need to have robust components, such as reinforced casings, high-strength materials, and proper sealing mechanisms to withstand the elevated pressures. Special attention should be given to the design of the water-lubricated bearing system to ensure it can handle the increased loads and pressures.
  2. Water Supply and Cooling: High-pressure compressors generate more heat during the compression process, requiring efficient cooling mechanisms to maintain safe operating temperatures. Sufficient water supply and cooling capacity must be available to handle the increased heat load. Adequate flow rates, temperature control, and cooling methods, such as water jackets or external cooling systems, may be necessary to prevent overheating and ensure proper lubrication and cooling of the compressor components.
  3. Water Quality: The quality of the water used for lubrication becomes even more critical in high-pressure applications. Any impurities, contaminants, or minerals present in the water can cause increased wear, corrosion, or blockages, jeopardizing the compressor’s performance and reliability. Water treatment or filtration systems may be required to maintain the desired water quality and prevent damage to the compressor.
  4. Sealing and Leakage Control: As the pressure increases, it becomes more challenging to maintain effective sealing and prevent leakage in the compressor system. Proper sealing mechanisms, such as high-quality seals and gaskets, are essential to ensure minimal leakage and maintain the required pressure levels. Adequate monitoring and maintenance of the sealing components are necessary to prevent energy losses and ensure the compressor’s efficiency.

It’s worth noting that for extremely high-pressure applications, water-lubricated compressors may not be the most suitable choice. In such cases, alternative lubrication methods, such as oil or specialized lubricants, are often preferred to handle the extreme pressures and provide adequate lubrication and cooling.

When considering the use of water-lubricated compressors in high-pressure applications, it is crucial to consult with the compressor manufacturer or a qualified engineer to ensure that the chosen compressor model is specifically designed and rated for the desired pressure range. Proper installation, maintenance, and adherence to the manufacturer’s guidelines are essential to ensure the safe and efficient operation of the compressor in high-pressure conditions.

air compressor

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Filtration plays a crucial role in water-lubricated air compressors, serving several important purposes. Here’s a detailed explanation of the role of filtration in water-lubricated air compressors:

Contaminant Removal:

  • Particle Filtration: Filtration systems in water-lubricated air compressors are designed to remove particles and contaminants from the water. These can include sediment, rust, debris, and other solid particles that may be present in the water supply. Removing these contaminants is essential to prevent blockages, clogging, and damage to the compressor components.
  • Oil Removal: In some cases, water used in compressors may contain traces of oil or hydrocarbons. Filtration systems can also help remove oil and hydrocarbon contaminants from the water, ensuring that the lubrication system remains clean and effective.

Protection of Components:

  • Lubrication System: Filtration prevents contaminants from reaching the lubrication system of water-lubricated air compressors. This helps maintain the cleanliness and integrity of the lubricant, ensuring optimal lubrication performance and minimizing wear on the compressor’s moving parts. Clean and filtered water can enhance the efficiency and lifespan of the compressor’s lubrication system.
  • Heat Exchangers and Cooling Systems: Water-lubricated compressors often rely on heat exchangers and cooling systems to regulate the temperature of the compressed air and the compressor itself. Filtration helps protect these components by preventing the accumulation of debris and contaminants that can hinder heat transfer and reduce the cooling efficiency. Clean water free from particles and contaminants promotes effective heat exchange and cooling.

Prevention of System Fouling:

  • Scaling and Deposits: Filtration systems also help prevent scaling and deposits that can occur when water with high mineral content or hardness is used. These deposits can accumulate on the internal surfaces of the compressor, heat exchangers, or other components, reducing their efficiency and potentially causing operational issues. By removing impurities and controlling mineral content, filtration minimizes the risk of scaling and deposits.

Extended Equipment Lifespan:

  • Component Protection: By effectively removing contaminants, filtration systems contribute to the protection and longevity of water-lubricated air compressor components. Clean and filtered water reduces the risk of component wear, corrosion, fouling, and blockages, ultimately extending the lifespan of the compressor and reducing maintenance and replacement costs.

Regular Maintenance and Monitoring:

  • Filter Replacement: Filtration systems require regular maintenance, including the replacement or cleaning of filters. The frequency of filter replacement depends on factors such as water quality, usage conditions, and the specific requirements of the compressor manufacturer. Regular maintenance ensures that the filtration system continues to effectively remove contaminants and protect the compressor components.
  • Monitoring Water Quality: Alongside filtration, monitoring the quality of the water used in water-lubricated compressors is essential. This can involve periodic water analysis, measurement of key parameters such as pH or conductivity, and visual inspections. Monitoring helps identify any changes in water quality or potential issues with the filtration system, allowing for timely maintenance or corrective actions.

In summary, filtration plays a critical role in water-lubricated air compressors by removing contaminants, protecting components, preventing system fouling, and extending equipment lifespan. By maintaining clean and filtered water, filtration systems contribute to the efficient operation, reliability, and longevity of water-lubricated compressors.

air compressor

Advantages of Using Water as a Lubricant in Air Compressors

Water can be used as a lubricant in air compressors, offering several advantages over traditional lubricants such as oils or synthetic lubricants. Here are some of the advantages:

  1. Cost-effective: Water is a readily available and inexpensive resource, making it a cost-effective lubricant option for air compressors. Compared to oils or synthetic lubricants, water is significantly cheaper, which can result in cost savings for businesses and industries that heavily rely on air compressors.
  2. Environmentally friendly: Water is a non-toxic and environmentally friendly lubricant. It does not contain harmful chemicals or pollutants that can contribute to air or water pollution. Using water as a lubricant in air compressors reduces the risk of contamination and minimizes the environmental impact associated with traditional lubricants.
  3. Improved heat dissipation: Water has excellent heat transfer properties. It can absorb and dissipate heat more efficiently compared to oils or synthetic lubricants. Air compressors generate heat during operation, and using water as a lubricant helps to dissipate this heat effectively, preventing overheating and prolonging the lifespan of the compressor.
  4. Reduced fire hazard: Compared to oils or synthetic lubricants, water has a significantly higher flash point, which means it is less likely to ignite or contribute to fire hazards. This fire-resistant property of water makes it a safer lubricant choice, especially in environments where fire safety is a concern.
  5. Lower maintenance requirements: Water does not leave behind sticky residues or deposits, as some oils or synthetic lubricants might. This characteristic reduces the maintenance requirements of air compressors. It simplifies the cleaning process and reduces the frequency of lubricant changes, resulting in reduced downtime and maintenance costs.

Overall, using water as a lubricant in air compressors can offer significant advantages in terms of cost-effectiveness, environmental friendliness, heat dissipation, fire safety, and maintenance requirements.

China Good quality Low Noise Oil Free Screw Type Air Compressors for Medical Industry / Oxygen   manufacturer China Good quality Low Noise Oil Free Screw Type Air Compressors for Medical Industry / Oxygen   manufacturer
editor by CX 2024-04-08

China manufacturer CHINAMFG UK Brand Baeo-55-3 CHINAMFG Oil Free Water Lubricated 10bar 22kw Oil-Free Screw Air Compressor for Food Industry air compressor parts

Product Description

Geso UK brand Dry oilless oil-free air compressor
 

Product Description

 

Product Parameters

Parameter for Dry oil-free air compressor
 Model Power
(kw)
Working
Pressure
(Mpa)
Air Delivery
(m³/min)
 
Dimensions
(L*W*H) mm
Weight
(kg)
 
Outlet Pipe Diameter
BAEO-37V 37 0.75 4.41-6.3 2150*1370*1910 2080 DN50
0.85 3.85-5.5
1.00 2.94-4.2
BAEO-45V 45 0.75 4.71-7.71 2150*1370*1910 2170 DN50
0.85 4.62-7.31
1.00 3.85-6.32
BAEO-55V 55 0.75 5.55-9.92 2150*1370*1910 2200 DN50
0.85 5.05-8.94
1.00 4.60-7.88
BAEO-75V 75 0.75 7.52-12.87 2150*1370*1910 2290 DN50
0.85 7.23-12.51
1.00 6.47-11.22
BAEO-90V 90 0.75 9.37-16.05 2150*1370*1910 2330 DN65
0.85 8.66-14.52
1.00 7.58-12.92
BAEO-110V 110 0.75 11.63-19.94 2700*1590*2360 3080 DN65
0.85 11.36-19.12
1.00 11.65-17.31
BAEO-132V 132 0.75 13.56-24.1 2700*1590*2360 3170 DN65
0.85 13.54-22.76
1.00 11.55-19.83
BAEO-160V 160 0.75 15.42-28.4 2700*1590*2360 3210 DN65
0.85 15.03-26.2
1.00 13.83-23.66
BAEO-185V 185 0.75 17.93-32.8 3050*2000*2200 4300 DN65
0.85 17.53-28.55
1.00 15.53-26.85
BAEO-200WV 200 0.75 21.03-36.4 3050*1932*2060 4400 DN100
0.85 20.53-33.44
1.00 17.93-29.82
BAEO-220WV 220 0.75 24.9-42 3050*1932*2060 4400 DN100
0.85 22.4-37.5
1.00 19.8-33.2
BAEO-250WV 250 0.75 28.05-46.2 3050*1932*2060 4580 DN100
0.85 25.55-43.63
1.00 22.57-38.32
BAEO-280WV 280 0.75 32.2-48.8 3050*1932*2060 4580 DN100
0.85 30.45-47.5
1.00 29.05-45
BAEO-315WV 315 0.75 35.07-52.5 3350*2130*2200 6350 DN125
0.85 33.25-50.6
1.00 31.15-48.5
BAEO-355WV 355 0.75 42.91-65.2 3350*2130*2200 6750 DN125
0.85 40.95-59.3
1.00 38.64-55.2

 Model Power
(kw)
Working
Pressure
(Mpa)
Air Delivery
(m³/min)
 
Dimensions
(L*W*H) mm
Weight
(kg)
 
Outlet Pipe Diameter
BAEO-37V 37 0.75 4.41-6.3 2150*1370*1910 2080 DN50
0.85 3.85-5.5
1.00 2.94-4.2
BAEO-45V 45 0.75 4.71-7.71 2150*1370*1910 2170 DN50
0.85 4.62-7.31
1.00 3.85-6.32
BAEO-55V 55 0.75 5.55-9.92 2150*1370*1910 2200 DN50
0.85 5.05-8.94
1.00 4.60-7.88
BAEO-75V 75 0.75 7.52-12.87 2150*1370*1910 2290 DN50
0.85 7.23-12.51
1.00 6.47-11.22
BAEO-90V 90 0.75 9.37-16.05 2150*1370*1910 2330 DN65
0.85 8.66-14.52
1.00 7.58-12.92
BAEO-110V 110 0.75 11.63-19.94 2700*1590*2360 3080 DN65
0.85 11.36-19.12
1.00 11.65-17.31
BAEO-132V 132 0.75 13.56-24.1 2700*1590*2360 3170 DN65
0.85 13.54-22.76
1.00 11.55-19.83
BAEO-160V 160 0.75 15.42-28.4 2700*1590*2360 3210 DN65
0.85 15.03-26.2
1.00 13.83-23.66
BAEO-185V 185 0.75 17.93-32.8 3050*2000*2200 4300 DN65
0.85 17.53-28.55
1.00 15.53-26.85
BAEO-200WV 200 0.75 21.03-36.4 3050*1932*2060 4400 DN100
0.85 20.53-33.44
1.00 17.93-29.82
BAEO-220WV 220 0.75 24.9-42 3050*1932*2060 4400 DN100
0.85 22.4-37.5
1.00 19.8-33.2
BAEO-250WV 250 0.75 28.05-46.2 3050*1932*2060 4580 DN100
0.85 25.55-43.63
1.00 22.57-38.32
BAEO-280WV 280 0.75 32.2-48.8 3050*1932*2060 4580 DN100
0.85 30.45-47.5
1.00 29.05-45
BAEO-315WV 315 0.75 35.07-52.5 3350*2130*2200 6350 DN125
0.85 33.25-50.6
1.00 31.15-48.5
BAEO-355WV 355 0.75 42.91-65.2 3350*2130*2200 6750 DN125
0.85 40.95-59.3
1.00 38.64-55.2

 Model Power
(kw)
Working
Pressure
(Mpa)
Air Delivery
(m³/min)
Dimensions
(L*W*H) mm
Weight
(kg)
 
Outlet Pipe Diameter
BAEO-37LSPM 37 1.50 13.5 2150*1370*1910 2200 DN65
2.00 12.6
2.50 10.5
3.00 9
3.50 7.5
BAEO-45LSPM 45 1.50 16.5 2150*1370*1910 2300 DN65
2.00 14.8
2.50 13
3.00 10.5
3.50 8.5
BAEO-55LSPM 55 1.50 20.5 2700*1590*1840 2800 DN100
2.00 18.5
2.50 16
3.00 13.5
3.50 10.5
BAEO-75LSPM 75 1.50 26.5 2700*1590*1840 2900 DN100
2.00 22.8
2.50 20.5
3.00 19.2
3.50 15.5
BAEO-90LSPM 90 1.50 32.8 2700*1590*1840 3100 DN100
2.00 29
2.50 26
3.00 22.5
3.50 20.2
BAEO-110LSPM 110 1.50 43.6 2820*2052*1876 3300 DN125
2.00 40.5
2.50 33.3
3.00 30.8
3.50 26.8
BAEO-132LSPM 132 1.50 55 2820*2052*1876 3500 DN125
2.00 50.5
2.50 43.5
3.00 40.8
3.50 33.8
BAEO-160LSPM 160 1.50 65.5 2820*2052*1876 3800 DN125
2.00 60.5
2.50 52.5
3.00 46.5
3.50 40.8
BAEO-200LSPM 200 1.50 85 2820*2052*1876 4000 DN125
2.00 72.5
2.50 60.5
3.00 55
3.50 50.5

 
 

Parameter for water injected oil-free air compressor
Model  Working Pressure
(Mpa)
Air Delivery
(m³/min)
Moter Power
(kw)
Dimensions (mm) Weight
(kg)
Lubricating water(L) Outlet Pipe Diameter
 (L)  (W)  (H)
BAEW-7A 0.70 1.20 7.5 1000 700 1050 410 25 G3/4
0.80 1.10
1.00 0.90
BAEW-11A 0.70 1.70 11 1150 850 1250 480 25 G3/4
0.80 1.60
1.00 1.40
BAEW-15A 0.70 2.60 15 1300 950 1250 640 30 G1
0.80 2.50
1.00 2.00
BAEW-18A 0.70 3.20 18.5 1500 1050 1400 770 35 G1
0.80 3.00
1.00 2.50
BAEW-22A 0.70 3.90 22 1500 1050 1400 800 35 G1
0.80 3.60
1.00 3.00
BAEW-30A 0.70 5.20 30 1750 1150 1500 1100 70 G1 1/4
0.80 5.00
1.00 4.40
BAEW-37A 0.70 6.40 37 1750 1150 1500 1150 70 G1 1/4
0.80 6.10
1.00 5.70
BAEW-45A 0.70 8.10 45 1750 1150 1500 1250 90 G1 1/4
0.80 7.50
1.00 6.80
BAEW-55W 0.70 11.00 55 1900 1250 1360 1250 90 G2
0.80 10.20
1.00 9.00
BAEW-75W 0.70 13.20 75 1900 1250 1360 1650 110 G2
0.80 12.80
1.00 10.00
BAEW-90W 0.70 16.00 90 1900 1250 1360 2100 110 G2
0.80 14.90
1.00 13.00
BAEW-110W 0.70 20.50 110 2200 1600 1750 2600 130 DN65
0.80 19.50
1.00 17.60
BAEW-132W 0.70 25.80 132 2200 1600 1750 2700 130 DN65
0.80 23.50
1.00 20.60
BAEW-160W 0.70 28.00 160 2200 1600 1750 2900 165 DN65
0.80 26.00
1.00 24.60
BAEW-185W 0.70 30.50 185 2900 1800 1950 3300 180 DN100
0.80 29.50
1.00 25.00
BAEW-200W 0.70 37.00 200 2900 1800 1950 3500 180 DN100
0.80 34.00
1.00 28.00
BAEW-220W 0.70 38.00 220 2900 2000 2300 4500 180 DN100
0.80 36.00
1.00 30.00
BAEW-250W 0.70 43.00 250 2900 2000 2300 4700 180 DN100
0.80 41.00
1.00 38.00
Remark:A:air cooled      W:water cooled

 

Parameter for oil-free scroll air compressor
 Model  
Working
Pressure
(Mpa)
 
Air Delivery
(m³/min)
Power
(kw)
Dimensions
(L*W*H) mm
 
Weight
(kg)
 
Outlet Pipe Diameter
(pcs) Remark
BAE-4WS 0.8 0.4 3.7 610 730 930 200 3/4 Ball valve 1*0.4  
1 0.33
BAE-4WS-ND 0.8 0.4 1810 820 1700 350 3/4 Ball valve 1*0.4 built-in integrated 200L
1 0.33
BAE-4WS-WD 0.8 0.4 1400 840 1490 300 1 Ball valve 1*0.4 External integrated 200L
1 0.33
BAE-5.5WS 0.8 0.6 5.5 610 730 930 220 3/4 Ball valve 1*0.6  
1 0.49
BAE-5.5WS-ND 0.8 0.6 1810 820 1700 380 3/4 Ball valve 1*0.6 built-in integrated  200L
1 0.49
BAE-5.5WS-WD 0.8 0.6 1400 840 1490 320 1 Ball valve 1*0.6 External integrated 200L
1 0.49
BAE-7.5WS 0.8 0.8 7.5 1200 700 1200 350 1 Ball valve 2*0.4  
1 0.66
BAE-11WS 0.8 1.2 11 1200 700 1200 400 1 Ball valve 2*0.6  
1 0.98
BAE-16.5WS 0.8 1.8 16.5 1200 700 1670 500 1 Ball valve 3*0.6  
1 1.5
BAE-22WS 0.8 2.4 22 1550 1200 1150 800 1 Ball valve 4*0.6  
1 2
BAE-27WS 0.8 3 27.5 1550 1200 1150 1080 1 Ball valve 5*0.6  
1 2.4
BAE-33WS 0.8 3.6 33 1550 1200 1150 1200 1 Ball valve 6*0.6  
1 3
BAE-38.5WS 0.8 4.2 38.5 2150 1450 1700 1400 2 Ball valve 7*0.6  
1 3.6
BAE-44WS 0.8 4.8 44 2150 1450 1700 1520 2 Ball valve 8*0.6  
1 4
BAE-49WS 0.8 5.4 49.5 2150 1450 1700 1650 2 Ball valve 9*0.6  
1 4.5

 

Certifications

Packaging & Shipping

Company Profile

Geso is a global aerodynamic systems group of companies, wholly owned by BAE CHINAMFG SYSTEMS, headquartered in London, United Kingdom, and a leader in the European gases sector.
BAE Systems, the parent company of CHINAMFG Group, was founded in 1871 and is committed to the research and development and production of industrial gases. In 2002, BAE Systems set up a representative office in China, importing products from the United Kingdom to China and deploying after-sales service offices in China, and in 2018 BAE Systems established a wholly-owned company “ZheJiang Geso systems Industrial PLC and invested 11 million U.S. dollars to build an intelligent manufacturing center; dedicated to research and development, production and market development. Our products include energy-saving screw air compressors, nitrogen/oxygen generators, dry oil-free air compressors, water-lubricated oil-free air compressors, mobile air compressors, process gas compressors, medium and high-pressure screw air compressors, centrifugal air compressors, etc., which are widely utilized in various production and industrial fields, and we have set up the “ZheJiang Geso systems Industrial PLC”, “ZheJiang Geso Equipment Co.,Ltd.”, “ZheJiang Geso Energy Equipment Co.,Ltd.” 3 companies, more than 30 branches and offices throughout the country, more than 200 distributors, for all walks of life to provide high-quality intelligent energy-saving air compressor system solutions.
Geso Group inherits the advanced technology and production management mode of British BAE Systems, combined with the Chinese market demand, in order to ensure the production safety of the user, strictly follow the Group’s product development process, each new product after 40 test items and 3000 hours of durability testing, to protect the quality of the product from the source; CHINAMFG compressor adopts the high quality screw compression element developed by BAE Systems, The material is used in the construction of large ships and nuclear submarines, which ensures the service life of the air compressor. The structure of the air compressor has been developed by the design team of BAE Group headquarters, which ensures the product quality and energy-saving effect. IE5 energy-saving motors, ABB electronic control system, and three-stage frequency conversion energy-saving system are selected to reduce energy consumption and carbon dioxide emissions, which saves costs for customers and realizes small investment and big power. Meanwhile, by optimizing the design and reducing the screw compression element’s speed, our air compressors have excellent silent performance. Independent research and development of intelligent Internet of Things (IoT) technology realizes the automatic and precise supply of air compressor and nitrogen generator equipment with the actual demand amount of the user to meet the automation experience of unattended, remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless docking and evaluation feedback. Convenient interconnected management with air compressors is realized through computers, cell phones and iPads. In addition, the reasonable construction and excellent workmanship of Geso reduces unnecessary maintenance work in normal times, making maintenance more convenient and efficient.
Through years of high-speed development, Geso Group has service outlets in more than 2 hundred cities across the country, 24-hour service hotline response and Internet warranty service. Thirteen direct spare parts warehouses to provide customers with repair services in a more rapid and timely manner.
After-sales service is not only limited to the product itself, but also includes a series of complete systematic services such as compressed air system testing and optimization, intelligent air supply control for air compressors, waste heat recovery, variable frequency piping, piping, cables, and construction turnkey projects. The service engineers not only undergo strict training and assessment, but also equipped with professional testing and maintenance tools to provide customers with quality service experience and escort production.
We are committed to a lifetime free of labor charges to reduce the user’s cost of use and avoid the phenomenon of indiscriminate charges. Based on our service concept to provide customers with free training services, regular testing of the user’s energy efficiency report data and develop energy-saving programs to ensure user satisfaction and energy-saving effect. For 3 consecutive years, we have been selected as 1 of the top 10 brands by third-party organizations such as China Brand Network.
As a global aerodynamic systems group of companies, we carry the mission of innovation, quality and service. Whether it is energy saving and environmental protection, quiet performance or intelligent, always adhere to the praise of the customer experience as the center of the hard workers, Geso, to create a global CHINAMFG brand of fluid machinery, and continue to become a high-end energy-saving products industry leader.
Timeline of Geso history

BAE MARCONI ELETRONIC SYSTEMS was founded in 1871 in London, England. In the same year, we developed and produced the first reciprocating compressor and devoted ourselves to the development and production of industrial gases.
In 1910, the company’s main business expanded to multiple areas: air compressors, nitrogen/oxygen air separation equipment, integrated electronic products, the company’s core product development of single-cylinder reciprocating air compressor technology and mass production.
In 1999, the company was founded as “BAE CHINAMFG SYSTEMS LTD” and developed the first twin-screw air compressor and established the brand “GESO SYSTEMS”.
In 2000, the company developed and produced the first dry-type oil-free screw machine into the market, and it is widely used in the European medical, food and electronic industries.
In 2002, BAE Group set up a representative office in China, products from the United Kingdom after the production of original imported equipment for the Chinese market expansion, and successfully entered the Chinese aerospace and high-precision machining field market.
In 2006, a total of 26 after-sales service operation outlets were built in each provincial capital city in China, fully deploying the after-sales service system to quickly respond to and safeguard users’ experience and production safety.
In 2016, a warehousing and logistics center was established in ZheJiang , China, to ensure the timely supply of complete machines and spare parts for the Chinese market.
In 2018, the British BAE Group registered in China to establish “ZheJiang Geso systems Industrial PLC” and set up a compressor assembly and production plant in ZheJiang , China at the same time, with a registered capital of 11 million U.S. dollars.
In 2571, ZheJiang Geso systems Industrial PLC. invested and established “ZheJiang Geso Equipment Co., Ltd.” and set up a nitrogen/oxygen air separation equipment sales company in HangZhou, and in the same year, set up the second phase of the project of 300 sets of nitrogen/oxygen equipments in ZheJiang factory. The R&D and production of nitrogen/oxygen control equipment was added.
In 2571, we invested in the establishment of “ZheJiang Geso Energy Equipment Co., Ltd.” and registered some of the former offices in provincial capitals as branches to complete the separation of production and sales, and to realize the high efficiency and convenience of national market development and service.
 

Our Advantages

Core components: the screw compression element adopts the British R & D BAES series screw compression element , the material is used in the United Kingdom in the construction of aircraft carriers, nuclear submarine construction , fine material to ensure that the service life of the air compressor, decades still as new; high-quality S K F bearings life as high as 100,000 (100 thousand) hours; the use of imported ASCO valves and CHINAMFG solenoid valves ABB electrical components, to ensure that the system is safe and stable operation for long periods of time.
Science and technology research and development: the structure of the air compressor is developed by the design team at the headquarters of BAE Group in the UK, so that the quality and energy saving of the air compressor is satisfactory to the users. The R&D personnel of the British headquarters total 220 people, dedicated to energy-saving system research and development funds of 1.5 million U.S. dollars per year, to ensure that the equipment of energy-saving products of superiority; air separation equipment selection of the German CHINAMFG controller and touch screen, flow, purity, pressure and dew point intuitively presented in the touch screen, the process and the action screen vivid image, at a glance, leaving the DCS remote ports, the data can be transmitted to a centralized control room and cell phone terminal. The data can be transmitted to the central control room and mobile phone;
Energy saving and environmental protection: IE5 energy-saving motors, ABB electronic control system, three-level frequency conversion (motor, fan, oil pump) energy-saving system, in the selection of materials and process design, the selection of special stainless steel management connection, the design of which ensures that the internal leakage of air compressor air volume ≤ 0.571m³/min, the use of imported fibers oil and gas separation technology and oil and gas barrel precision design, the reasonable location of the pipeline with the air compressor The internal pressure difference ≤ 0.003MPa, thus reducing energy consumption, reducing carbon dioxide emissions, reducing the use of cost, small investment, big power;
Strong silent performance: through the optimization of air compressor design and air compression element performance enhancement, reduce the air compression element speed, not only to extend the service life of the air compressor, and at the same time significantly reduce the noise generated by the equipment, CHINAMFG polyester fiber polymer material developed from the sound insulation cotton and customized rubber shock absorbers, the silent equipment to bring the protection of the equipment, equipment operators and production personnel to bring the health and safety of the guarantee;
High degree of automation: The company has independently developed intelligent Internet of Things technology combined with air compressor and nitrogen generator equipment, which collects data to the cloud data processor through 2G/4G/NB-loTLoRa/Ethernet, automatically matches the accurate supply of gas with the user’s actual demand, and realizes the automation experience of unmanned, remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless docking, and evaluation feedback. It realizes unattended remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless connection, evaluation and feedback.
Convenient maintenance: reasonable construction, fine workmanship, reduce the usual unnecessary maintenance, cleaning and maintenance is more convenient, in the special design process, so that the efficiency of the maintenance staff to improve, to protect the user to use the timeliness;
One-stop service: complete product range, one-stop service for air system and gas engineering.
Qualification and certification: Geso has obtained ISO14001 environmental management system, ISO45001 health management system and ISO9001 quality management system certification, certificate 0 oil-free certification, CE EU certification, air compressor energy-efficiency certification, 3A integrity system certification and other certificates from authoritative certification organizations, which can fully guarantee the safety of users, and has been highly recognized by the market and users. We are highly recognized by the market and users.


Product Manufacturing and Acceptance Standards

The design, manufacture, installation and acceptance of screw air compressor are all based on the relevant Chinese national standards (GB) and in accordance with the requirements of the following relevant standards, norms and regulations (but not limited to), with full consideration of the impact of local environmental conditions and conditions of use.

No. Standard Item
1 GB150-1998 Steel Pressure Vessels
2 GB151-1998 Steel Shell and Tube Heat Exchangers   
3 JB/T4709  Steel Pressure Vessel Welding Regulations     
4 GB/T13278 Technical conditions for general screw air compressors
5 GBJ78 Noise hygiene standards for industrial enterprises  
6 GB3853 Test Methods for Pneumatic Compressor Performance for General Use
7 GB4980 Determination of sound power level of volumetric compressor noise – Engineering method   
8 JB8-82  Product Labeling   
9 ASME-PTC-9-1970
(American Society of Mechanical Engineers standards)
Air compressor performance test standards
10 VDI-2056 (Standard of the Association of German Engineers) Operating Vibration Test Standards
11 ISO-2151 (International Organization for Standardization standard) Operating Noise Test Standards
12 GBJ29-90 Compressed air station design specification
13 GB3323-87 Radiographic and quality analysis of steel melting welded joints
14 GB4720 Electrical Control Equipment Part I Low Voltage Electrical Control Equipment  
15 JB4127 Mechanical Seal Technical Condition 3 Main Technical Data

 

After Sales Service

1 Technical services: regardless of pre-sale, sale, after-sale, as long as the user side demand equipment technical help and consulting, the company will be accurate within 24 hours to provide relevant technical information free of charge.
2 After the successful on-site start-up and commissioning acceptance, our after-sales engineers are responsible for the user’s operators to carry out routine and emergency operation training.
3 Under normal operation, maintenance and repair of the equipment, the whole unit is guaranteed for 1 year, and the air compression element is guaranteed for 5 years. During the warranty period, the non-wearable parts in the unit, damage or failure under normal use, are gratuitous compensation, free of charge replacement.
4 Regardless of the warranty period inside and outside, my company will be on schedule to the factory inspection of gas purity, flow, pressure, voltage, current, screws tightness, etc. are to do a comprehensive test in a timely manner to understand the dynamics of the unit’s operation, such as receiving the notification of the user’s equipment failure, on-call.
5 In normal operation, my company will be monthly, quarterly and regularly arranged for the user to telephone or after-sales engineers to the scene to do the equipment operation visit work, timely understanding of the unit operation dynamics, received the user equipment failure notification, the office to immediately give a telephone reply, within 1 hour to the scene to deal with. Office in the field can not deal with the situation, the ZheJiang head office will be sent directly to the scene within 24 hours to deal with after-sales engineers. In order to ensure the long-term stability of the equipment work.
6 Spare parts service: In case of damage to tubing parts, Geso will solve the problem first, then determine the responsibility, and then talk about the price, and then replace the parts after the problem is solved.
7 Free labor fee, Geso company lifetime free labor fee, reduce the user cost of use, to avoid the phenomenon of indiscriminate charging.
8 Service quality assurance: the company’s after-sales service personnel in the headquarters of the Geso after systematic training and strict examination to obtain technical certificates to ensure that each after-sales service personnel’s ability to deal with technology.
9 Service outlets: the company has after-sales service outlets in most areas of China, to ensure that the user’s problems are solved in a short period of time and there is a storage center in the after-sales service outlets to ensure the timely supply of spare parts.
10 Free training service: Geso company through the site operation training to ensure the correct use of the user operator, Geso company will be adjusted for the user personnel, re-training on-site personnel operation, each training are not charged any fees.
11 Energy-saving services: If you buy our product line, our company will regularly test the user energy efficiency report data, energy-saving data distraction and develop programs, timely energy-saving adjustments to the equipment, to protect the user’s energy savings and cost reductions.
 

Customer Cases

No. Customers company name Quantities
1 HangZhou Risen Electromechanical Co.,Ltd. 5 units
2 HangZhou Nuoyi Laser Equipment Co.,Ltd. 3 units
3 ZHangZhoug Luneng Renewable Resources Co.,Ltd. 4 units
4 HangZhou Renliang Medical Machinery Equipment Co.,Ltd. 2 units
5 ZheJiang CHINAMFG Limited Liability Company 6 units
6 HangZhou CHINAMFG Machinery Co.,Ltd. 1 unit
7 HangZhou CHINAMFG Trading Co.,Ltd. 1 unit
8 ZheJiang Veneta Clothing Co.,Ltd. 1 unit
9 ZheJiang CHINAMFG Intelligent Equipment Co.,Ltd. 7 units
10 HangZhou CHINAMFG Construction & Installation Engineering Co.,Ltd.  6 units
11 ZheJiang Zhongfa Environmental Protection Co.,Ltd. 6 units
12 ZheJiang CSIC Lingang Shipbuilding Equipment Co.,Ltd. 2 units
13 ZheJiang Wangxin Soybean Products Equipment Co.,Ltd. 2 units
14 ZheJiang Zhi Fu Pharmaceutical Technology Partnership (Limited Partnership) 2 units
15 Hongli Shoe Material 5 units
16 HangZhou HangZhoun Metal Products Co.,Ltd. 6 units
17 ZheJiang CHINAMFG Logistics Machine Co.,Ltd. 3 units
18 ZheJiang Qiangxiong Construction Group Co.,Ltd. 5 units
19 HangZhou CHINAMFG Logistics Machine Co.,Ltd.   4 units
20 Hongzheng Electric Co.,Ltd. 3 units
21 HangZhou Hengjun Technology Co.,Ltd. 3 units
22 ZheJiang Dajing Biological Engineering Co.,Ltd. 5 units
23 HangZhou Yi Ai Electronic Technology Co.,Ltd. 7 units
24 ZheJiang Shengwei Bio-technology Co.,Ltd. 2 units
25 ZheJiang Jiuding New Material Co.,Ltd. 4 units
26 HangZhou Xitu Environmental Protection Technology Co.,Ltd. 2 units
27 ZheJiang Taiqing Mechanical & Electrical Co.,Ltd. 3 units
28 HangZhou Guitai Pipe Industry Co.,Ltd. 6 units
30 HangZhou Przeszler Advanced Molding Technology Co.,Ltd. 4 units
31 HangZhou CHINAMFG Thermal Power Co.,Ltd. 1 unit
32 HangZhou Tellier Environmental Protection Group Co.,Ltd. 1 unit
33 ZheJiang CHINAMFG Electric Power Design & Consulting Co.,Ltd. 3 units
34 HangZhou Hongfengde Auto Parts Co.,Ltd. 2 units
35 ZheJiang ZHangZhoug Mining Group Company Limited Danying Coal Mine, Gubao Township, Xiwen County 6 units
36 ZheJiang Zhongmin Da Zheng Surface Engineering Technology Co.,Ltd. 4 units
37 NDT Group YuHangZhou Environmental Protection Equipment Manufacturing Co.,Ltd. 4 units
38 ZheJiang Vimet Decoration Material Technology Co.,Ltd. 3 units
39 Kangyue Biotechnology Co.,Ltd. 2 units
40 HangZhou Kangcai Medical Supplies Co.,Ltd. 5 units
41 Dejuxin Energy Saving Technology (HangZhou) Co.,Ltd. 3 units
42 HangZhou CHINAMFG Packaging Industry Co.,Ltd. 2 units
43 HangZhou Tianlai Environmental Protection Equipment Co.,Ltd.  6 units
44 HangZhou Yongzhengxin Hardware Machinery Factory 3 units
45 HangZhou Industrial Park Shunhao Machinery Factory 2 units
46 HangZhou Chemical Machinery Manufacturing Co.,Ltd. 2 units
47 HangZhou Dehai Environmental Protection Technology Development Co.,Ltd. 3 units
48 ZheJiang Maosheng Environment Co.,Ltd. 1 unit
49 Air Force Engineering University Aviation Engineer Officer School 1 unit
50 ZheJiang Tiantuo Equipment Manufacturing Co.,Ltd. 1 unit
51 HangZhou Chemical Machinery Manufacturing Co.,Ltd. 2 units
52 HangZhou HangZhou Clothing Co.,Ltd. 2 units
53 HangZhou CHINAMFG Glass Co.,Ltd. 2 units
54 HangZhou City HangZhou Xihu (West Lake) Dis.ent City Development and Management Co.,Ltd. 2 units
55 HangZhou Sunshine CHINAMFG Chemical Engineering Co.,Ltd. 3 units
56 HangZhou CHINAMFG Electric Appliance Manufacturing Co.,Ltd. 4 units
57 HangZhou Xihu (West Lake) Dis. Electric Co.,Ltd. 3 units
58 HangZhou Saida Construction Machinery Co.,Ltd. 2 units
59 HangZhou Tellier Environmental Protection Co.,Ltd. 1 unit
60 ZheJiang Lvjing Environmental Protection Technology Engineering Co.,Ltd. 1 unit
61 China Construction Third Bureau Second Construction Engineering Co.,Ltd. 1 unit
62 HangZhou Przeszler Advanced Molding Technology Co.,Ltd. 1 unit
63 HangZhou Bochuang Environmental Protection Technology Co.,Ltd. 2 units
64 HangZhou Hi-Tech Zone Azure Environmental Protection Technology Co.,Ltd. 1 unit
65 ZheJiang Renze Technology Co.,Ltd. 1 unit
66 Dejuxin Energy Saving Technology (HangZhou) Co.,Ltd. 1 unit
67 ZheJiang Haibelian Kaihe Roofing Engineering Co.,Ltd.  1 unit
68 ZheJiang Xihu (West Lake) Dis. Technology Co.,Ltd. 2 units
69 HangZhou Huagong CHINAMFG Electronics Co.,Ltd. 1 unit
70 HangZhou Oriental Environmental Engineering Research Institute Co.,Ltd. 2 units
71 HangZhou Hi-Tech Zone Azure Environmental Protection Technology Co.,Ltd. 2 units
72 HangZhou Bochuang Environmental Protection Technology Co.,Ltd. 1 unit
73 ZheJiang Prime New Energy Technology Co.,Ltd. 3 units
74 Daiko International Trading (ZheJiang ) Co.,Ltd. 1 unit
75 ZheJiang Qiangxiong Construction Group Co.,Ltd. 3 units
76 HangZhou Kelen Commercial Equipment Co.,Ltd. 2 units
77 ZheJiang Bigo Electromechanical Equipment Co.,Ltd. 2 units
78 ZHangZhoug Qier Electromechanical Technology Co.,Ltd. 4 units
79 HangZhou Xihu (West Lake) Dis.deli Biotechnology Co.,Ltd.  3 units
80 ZheJiang Normal University 1 unit
81 Jumin Biotechnology Co.,Ltd.  3 units
82 HangZhou Sanfengqiao Foodstuffs Co.,Ltd. 3 units
83 HangZhou Jinji Strong Magnetic Co.,Ltd. 1 unit
84 ZheZheJiang di Industrial Co.,Ltd. 1 unit
85 Zhongtian Chaolong Technology Co.,Ltd. 3 units
86 ZheJiang WHangZhou Pharmaceutical Co.,Ltd. 1 unit
87 ZheJiang Hadajiang Liquor Liability Company 1 unit
88 Jacoby Environmental Materials Technology (ZheJiang ) Co.,Ltd. 5 units
89 HangZhou CHINAMFG Construction & Installation Engineering Co.,Ltd.  1 unit
90 ZHangZhoug Province Mechanical and Electrical Design and Research Institute Co.,Ltd. 1 unit
91 HangZhou CHangZhou District Hengwei Machinery Trading Co.,Ltd. 1 unit
92 ZheJiang Jiao Tong University 2 units
93 Chang Xihu (West Lake) Dis. (Individual) 2 units
94 HangZhou Xihu (West Lake) Dis.wang Paper Co.,Ltd.  3 units
95 HangZhou CHINAMFG Mould Technology Co.,Ltd.  2 units
96 HangZhou Institute of Technology 1 unit

FAQ 

 

[Q]: Are you a manufacturer or a trade company?
A : We are a factory, and we have our own factory in ZheJiang , we market our own products.

 

 

[Q]: What is your lead time?
A :Usually we will spend about 30 working days to make it.

 

 

[Q]: What is the shipping port?
A :ZheJiang ,HangZhou or HangZhou

 

[Q]: How can I get your quotation?
A : We will provide the quotation according to your request as soon as possible.
Before quotation, We would like to know:
1 you are end user or mid-buyer(agent, distributor,Supporting Enterprise or designing institute etc.)
2 if you are end user, what industry are you in?
3 have you bought such equipment before, what brand?
4Direction of use (where the compressor is used, what equipment it supplies)
5 What delivery volume, delivery pressure, whether frequency conversion, whether with after-treatment equipment do you want?
6 Have you ever heard about our brand:GESO

 

[Q]: What is your Quality assurance system?
A : ZheJiang Geso systems Industrial PLC is a wholly foreign-owned enterprise, and is also the authorized base for the production and assembly of screw compressors by BAE Systems in the UK. The company has passed ISO9001:2015 quality system certification of enterprises, ISO45001:2018 health and safety management system and ISO14001:2015 environmental management system and many other certifications. The company, from the chairman to every employee, has been trained in the world’s advanced quality system in order to obtain the induction certificate. Every year, we need to be reviewed and recognized by the certification body, and strictly in accordance with the certification system for each link in the strict day-to-day management of its products, procurement, inspection, testing, installation and commissioning of the whole machine are strictly in accordance with the ISO9001 program, to ensure that each compressor embodies the factory should be the quality and reliability of the company’s products with a high starting point, high-speed start, with a high reputation and high quality! The company’s products have a high starting point and high speed to start, with high reputation and high quality to win the trust of users from all walks of life. The company’s products to implement the 3 bags, 3 bags for 1 year. The company shall bear the replacement cost of parts, repair cost and transportation and miscellaneous cost of equipment round trip (except perishable parts such as 3 filters, lubricating oil and external auto-drainer) during the warranty period of the supplied equipments. If the rework or equipment damage is caused by our company’s drawings, data, technical documents errors or technical service personnel on-site guidance, our company is immediately responsible for free repair or replacement.

 

[Q]: What does your brand “GESO” mean?
A : Gas: Description of Geso products characterized as equipment for applications in the field of all types of gas processes.

Efficient: Design, innovation and development of a full range of products for the purpose of energy saving.

Stability: to ensure the user’s production safety and stability as a prerequisite requirement

OPTIMUM : to build a world-renowned brand of fluid machinery, and continue to become the industry leader in high-end energy-saving products.

Systems : the business philosophy centered on the praise of service customer experience. CHINAMFG provides compressors, after-treatment, pressure vessels, installation piping, intelligent cloud, air separation equipment and other series of products, providing users with one-stop product services; from pre-sales program design, installation of equipment during the sale, after-sales maintenance to create a full-system operation and service team.

 

Air Compressor Frequently Asked Questions

The following items are some of the most frequently asked air compressor questions and answers, courtesy of CHINAMFG systems.

How Does an Air Compressor Work?

An air compressor works by using electric power to create pressurized air that can then be released and converted to usable power for use in a number of applications, depending on your specific needs. It performs this by compressing air within a chamber by means of a piston, rotary vane or screw or scroll element and then releasing this pressurized air into your downstream receivers and distribution piping system.

How Do You Use an Air Compressor?

Follow these simple steps to use your air compressor safely and efficiently:

1. Check the oil level: For oil-filled compressors, check that the oil level reaches about ⅔ of the way up the dipstick.

2. Prepare the compressor: Attach hoses, plug into a grounded outlet, check the drain valve and flip the power switch.

3. Adjust the pressure regulator: Set the pressure to match the level your air tool requires.

4. Operate your device: The tank will refill as you use your tool.

5. Complete proper cleanup: Turn off the compressor to drain the pressure and open the air tank drain valve to clear out condensation.

What Does an Air Compressor Do?

Air compressors provide compressed air for applications such as filling gas cylinders with high-pressure clean air, providing pressurized clean air for operating pneumatic CHINAMFG systems or tools, filling tires and a wide variety of other applications across industries like automotive, medical, food and beverage, petroleum, pharmaceutical and more.

What Do You Use an Air Compressor For?

Air compressors can be used for many personal and professional applications. A few at-home uses include:

· Blowing up balloons

· Pumping up tires for bikes and vehicles

· Inflating pool accessories and air mattresses

· Refilling deflated sports equipment

· Pressure washing

· Powering tools for sanding, polishing and other types of crafting

· Painting with an airbrush or sprayer

Many businesses rely on air compressors to accomplish work safely and efficiently. Some industries that use compressors include:

· Agriculture

· Manufacturing

· Automobiles

· Pharmaceutical

· Food and beverage

· Dental and medical

· Construction

How Much Is an Air Compressor?

Air compressors can cost anywhere from $125 to $2,000. The price of an air compressor depends on many factors, including:

· PSI and CFM: Pounds per square inch (PSI) measures how much force an air compressor has, while cubic feet per minute (CFM) measures the flow.

· Duty cycle: This percentage indicates how long the compressor can provide air during a cycle.

· Life span: Compressors can last between 15,000 to 60,000 hours, depending on their use and size.

The type of compressor you need and how much you will pay for it will depend on your industry or personal needs.

How Often Do I Need to Change the Oil in My Air Compressor?

If you have a lubricated reciprocating, rotary screw or rotary vane air compressor, you’ll need to change the oil from time to time to keep it working properly. The recommended schedule is generally 3 months, subject to the manufacturer’s recommendation. For a rotary screw compressor, you’ll want to change the oil every 4,000 to 8,000 hours depending on the type of oil employed.

Do Air Compressors Run Out of Air?

If you run a regular duty cycle with an appropriate load, you will always have the air you need. As you use your tool, the pressure switch will detect the drop in pressure and start the compressor. Once the tank has refilled to the preselected pressure point, the compressor will shut off. The pressure switch will manage this function throughout the time you’re using an air tool.

If you attach a tool with an air requirement that is too great for the tank, you run the risk of emptying your air tank and having to wait for the compressor to refill it to a usable level. Always check your air compressor’s capabilities and your tool’s required pressure before connecting them.

Do I Need an Air Dryer in Addition to My Air Compressor?

It’s often a good value for you to add an air dryer to your air compressor system, as your air compressor can put a great deal of water into the compressed air system. Your air dryer could potentially remove gallons of water each day.

How Do I Control Contaminants in My Compressed Air System?

It’s important to have an effective air filtration system to keep your compressed air clean. CHINAMFG systems can provide you with all the air filters you need to help keep your compressed air clean.

How Often Do I Need to Replace My Air Intake Filter?

Air compressors with air intake filters need to be cleaned weekly. If your filter has built up so much debris that you can’t get it completely clean, or the filter is torn, you should replace it right away.

How Do I Control the Dew Point of My Compressed Air System?

If you’re worried about hitting the dew point, a quality air dryer should be the solution.

What Is the Correct Voltage for My Air Compressor?

Usually, 110 volts is sufficient for a small compressor. Larger compressors may take as much as 460 volts.

How Do I Drain the Water From My Tank?

You can drain your tank water manually or purchase an automatic drain valve to remove the water automatically. If water is becoming a big problem, consider investing in a more appropriately-sized air dryer.

What Is the Right Type of Hose for My Air Compressor?

It depends on the air compressor, but typically, they take a 1/4″ or 3/8″ hose. Your Geso systems professional can help you match the right hose to your compressor.

Do I Need a Reciprocating Compressor or a Rotary Screw Compressor?

For most applications, a reciprocating compressor is sufficient. If you need a compressor that runs continuously day and night, you need a rotary screw compressor.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Yes
Warranty: 1 Year
Lubrication Style: Oil-less
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Screw
Samples:
US$ 2100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

What Are the Safety Considerations When Using Water-Lubricated Compressors?

When using water-lubricated compressors, it is important to prioritize safety to prevent accidents, ensure the well-being of personnel, and maintain the integrity of the equipment. Here’s a detailed explanation of the safety considerations:

  1. Electrical Safety: Compressed air systems, including water-lubricated compressors, often involve electrical components and connections. Ensure that the electrical systems are properly installed, grounded, and protected according to applicable electrical codes and regulations. Regularly inspect electrical components, such as motors, switches, and wiring, for any signs of damage or wear that could pose electrical hazards.
  2. Pressure Safety: Water-lubricated compressors can operate at high pressures, presenting potential hazards. Follow the manufacturer’s guidelines and ratings to ensure that the compressor is operated within its specified pressure limits. Install and maintain pressure relief valves to prevent overpressurization and ensure the safe release of excess pressure. Regularly inspect pressure gauges, fittings, and connections for leaks, damage, or signs of degradation.
  3. Heat and Cooling Safety: Compressed air systems generate heat during the compression process, and proper cooling is essential to maintain safe operating temperatures. Ensure that cooling mechanisms, such as water jackets or external cooling systems, are functioning correctly and provide adequate cooling capacity. Monitor and control the temperature of the compressed air and the cooling water to prevent overheating and minimize the risk of equipment damage or failure.
  4. Water Quality and Treatment: The quality of the water used for lubrication is crucial for the performance and safety of water-lubricated compressors. Impurities, contaminants, or minerals in the water can lead to corrosion, blockages, or reduced lubrication effectiveness. Implement appropriate water treatment or filtration systems to maintain the desired water quality. Regularly monitor water quality and perform necessary maintenance and treatment to prevent potential safety and performance issues.
  5. Maintenance and Inspection: Establish a routine maintenance and inspection program for the water-lubricated compressor system. Regularly inspect the compressor, water distribution system, filters, and other components for any signs of wear, damage, or deterioration. Follow the manufacturer’s recommended maintenance procedures, including lubrication, filter replacement, and system checks. Promptly address any identified issues to prevent safety hazards and maintain the reliable operation of the compressor.
  6. Training and Personal Protective Equipment (PPE): Proper training of personnel who operate and maintain water-lubricated compressors is essential for safety. Ensure that operators and maintenance personnel are trained on the safe operation of the equipment, emergency procedures, and hazard identification. Provide appropriate personal protective equipment (PPE), such as safety glasses, gloves, and hearing protection, to minimize the risk of injuries from potential hazards, including high-pressure water, rotating parts, or noise.

It is important to consult applicable safety regulations, codes, and guidelines specific to your location and industry when using water-lubricated compressors. Additionally, follow the manufacturer’s instructions, warnings, and safety recommendations provided with the equipment to ensure the safe operation of water-lubricated compressors and mitigate potential risks.

air compressor

What Are the Considerations for Choosing Water-Lubricated vs. Oil-Lubricated Compressors?

When selecting between water-lubricated and oil-lubricated compressors, several considerations come into play. Here’s a detailed explanation of the key factors to consider when choosing between these two types:

Operating Environment:

  • Water Sensitivity: Water-lubricated compressors are well-suited for environments where water is readily available and can be easily supplied to the compressor system. On the other hand, oil-lubricated compressors are more suitable for applications where water is not readily available or where water contamination could pose a problem.
  • Cleanliness Requirements: If the application demands a high level of cleanliness, such as in certain manufacturing processes or cleanroom environments, water-lubricated compressors may be preferred. Water is inherently cleaner than oil and reduces the risk of oil contamination in sensitive operations.

Maintenance and Service:

  • Lubricant Replacement: Oil-lubricated compressors require regular oil changes and maintenance to ensure proper lubrication and performance. Water-lubricated compressors, on the other hand, eliminate the need for oil changes and associated maintenance tasks, simplifying the maintenance requirements.
  • Oil Contamination: Oil-lubricated compressors carry the risk of oil contamination in the compressed air system. This can be a concern in certain applications where oil contamination can negatively impact product quality or downstream equipment. Water-lubricated compressors reduce the risk of oil contamination, making them advantageous in such applications.

Environmental Impact:

  • Oil Disposal: Oil-lubricated compressors generate used oil that requires proper disposal in accordance with environmental regulations. Water-lubricated compressors eliminate the need for oil disposal, contributing to a reduced environmental impact.
  • Energy Efficiency: In terms of energy efficiency, water-lubricated compressors tend to have an advantage. Water has a higher specific heat capacity than oil, meaning it can absorb and dissipate heat more effectively. This can result in improved cooling efficiency and potentially lower energy consumption compared to oil-lubricated compressors.

Application-Specific Factors:

  • Operating Pressure: Water-lubricated compressors are generally suitable for lower to moderate operating pressures. Oil-lubricated compressors, on the other hand, can handle higher operating pressures, making them more appropriate for applications that require higher pressure levels.
  • Temperature Sensitivity: Water-lubricated compressors may have limitations in applications where low temperatures are encountered. Water freezing or becoming slushy can cause operational issues. Oil-lubricated compressors, with appropriate low-temperature oil formulations, can better handle such temperature-sensitive conditions.

Cost Considerations:

  • Initial Cost: Water-lubricated compressors generally have a lower initial cost compared to oil-lubricated compressors. This cost advantage can be attractive for applications with budget constraints.
  • Maintenance Cost: Over the long term, water-lubricated compressors may have lower maintenance costs due to the elimination of oil changes and associated maintenance tasks. However, it’s important to consider the specific maintenance requirements and costs associated with each type of compressor.

By considering these factors, including the operating environment, maintenance and service requirements, environmental impact, application-specific factors, and cost considerations, one can make an informed decision when choosing between water-lubricated and oil-lubricated compressors.

air compressor

Can Water-Lubricated Air Compressors Be Used in Medical Applications?

Water-lubricated air compressors can be used in certain medical applications, offering specific advantages for these environments. Here are some considerations regarding the use of water-lubricated air compressors in medical settings:

  1. Clean and sterile lubrication: Water is a clean and sterile lubricant, making it suitable for medical applications where maintaining a sterile environment is crucial. Water lubrication helps prevent contamination and ensures the integrity of medical products and procedures.
  2. Reduced risk of oil contamination: Oil-lubricated compressors pose a risk of oil carryover and oil vapor entering the compressed air system. This can be problematic in medical applications, where oil contamination could impact patient safety or interfere with sensitive medical equipment. Water-lubricated compressors eliminate this risk, providing a reliable and oil-free compressed air source.
  3. Compatibility with medical gases: Water-lubricated air compressors are compatible with medical gases such as oxygen or nitrous oxide. Unlike oil lubricants, water does not react or contaminate these gases, ensuring their purity and safety in medical procedures.
  4. Hygienic and easy to clean: Water lubrication simplifies cleaning procedures in medical environments. It does not leave behind sticky residues or require harsh chemicals for cleaning. Water-lubricated compressors can be easily cleaned and maintained, promoting a hygienic and safe medical facility.
  5. Reduced risk of fire hazards: Water has a higher flash point compared to oil lubricants, making water-lubricated compressors safer in terms of fire hazards. In medical settings, where fire safety is critical, using water as a lubricant can provide added peace of mind.
  6. Environmental friendliness: Water is a non-toxic and environmentally friendly lubricant choice. It does not contribute to air or water pollution, aligning with the sustainability goals of medical facilities.

While water-lubricated air compressors offer several advantages for medical applications, it’s important to note that specific requirements and regulations may vary depending on the type of medical procedure or equipment involved. It is advisable to consult with medical professionals or equipment manufacturers to ensure the suitability and compliance of water-lubricated air compressors for specific medical applications.

China manufacturer CHINAMFG UK Brand Baeo-55-3 CHINAMFG Oil Free Water Lubricated 10bar 22kw Oil-Free Screw Air Compressor for Food Industry   air compressor partsChina manufacturer CHINAMFG UK Brand Baeo-55-3 CHINAMFG Oil Free Water Lubricated 10bar 22kw Oil-Free Screw Air Compressor for Food Industry   air compressor parts
editor by CX 2024-03-18

China Custom 90kw 120 HP 12.5bar Oil Free Rotary Screw Air Compressor Manufacturer manufacturer

Product Description

Water-lubricated Oil-free Screw Air Compressor Advantages:

1.Clean air 100% oil-free
 
2.Use water instead of oil, higher cooling efficiency and compression efficiency
 
3.Optimal isothermal compression
 
4.Powerful MAM microcomputer controller and touch screen
 
5.Reasonable Structure, with perfect balancing
 
6.Components made of anti-rust and anti-corrosion materials ensure the durability
 
7.Significant energy saving, environmental-friendly and pollution-free
 
8.Designed especially for medical, pharmacy, instrument, coating, chemical industry and food processing, etc.

DENAIR Water-lubricated Oil Free Screw Air Compressor In Hannover Messe 2017 

Technical Parameters Of Water-lubricated Oil-free Screw Air Compressor :

Model Maximum working 
pressure
Capacity(FAD) installed motor
 power
Noise 
dB(A)
Dimensions
(mm)
Weight Air Outlet
bar(e) psig m3/min cfm kw hp L*W*H kg pipe Diameter
DAW-7 7 102 1.2 42.4 7.5 10 58 1200×775×1000 630 G1″
8 116 1.15 40.61 7.5 10
10 145 1.02 36.02 7.5 10
12.5 181 0.97 34.3 7.5 10
DAW-11 7 102 1.62 57.2 11 15 58 1200×775×1000 630 G3/4″
8 116 1.55 54.73 11 15
10 145 1.32 46.61 11 15
12.5 181 1.25 44.14 11 15
DAW-15 7 102 2.52 89 15 20 63 1400×1000×1200 650 G1″
8 116 2.4 84.74 15 20
10 145 2.12 74.9 15 20
12.5 181 1.61 56.85 15 20
DAW-18 7 102 3.25 114.8 18.5 25 65 1400×1000×1200 970 G1″
8 116 3.1 109.5 18.5 25
10 145 2.62 92.51 18.5 25
12.5 181 2.13 75.21 18.5 25
DAW-22 7 102 3.67 129.6 22 30 65 1400×1000×1200 1000 G1″
8 116 3.5 123.6 22 30
10 145 3.13 110.52 22 30
12.5 181 2.61 92.2 22 30
DAW-30 7 102 5.25 185.4 30 40 66 1850×1150×1300 1250 G1-1/2″
8 116 5 176.6 30 40
10 145 4.2 148.3 30 40
12.5 181 3.81 134.53 30 40
DAW-37 7 102 6.4 226 37 50 67 1850×1150×1300 1250 G1-1/2″
8 116 6.1 215.4 37 50
10 145 5.22 184.32 37 50
12.5 181 4.81 169.84 37 50
DAW-45 7 102 7.66 270.5 45 60 68 1850×1150×1300 1569 G2″
8 116 7.3 257.8 45 60
10 145 6.13 216.5 45 60
12.5 181 5.65 199.5 45 60
DAW-55 7 102 10.08 355.92 55 75 70 1900×1500×1700 1665 G2″
8 116 9.6 339 55 75
10 145 8.6 303.7 55 75
12.5 181 7.42 262 55 75
DAW-75 7 102 13.12 463.3 75 100 73 1900×1500×1700 1500 DN50
8 116 12.5 441.4 75 100
10 145 11.42 403.24 75 100
12.5 181 9.83 347.1 75 100
DAW-90(W) 7 102 17.11 604.2 90 120 73 1900×1500×1700 1800 DN50
8 116 16.3 575.6 90 120
10 145 14.52 512.7 90 120
12.5 181 12.3 434.31 90 120
DAW-110(W) 7 102 20.37 719.3 110 150 78 2150×1600×1800 2300 DN65
8 116 19.4 685.01 110 150
10 145 16.9 596.74 110 150
12.5 181 15.1 533.2 110 150
DAW-132(W) 7 102 23.32 823.43 132 175 78 2150×1600×1800 2500 DN65
8 116 22.21 784.24 132 175
10 145 20.38 719.62 132 175
12.5 181 18.29 645.82 132 175
DAW-160(W) 7 102 30.29 1069.54 160 215 78 2150×1600×1800 3000 DN65
8 116 28.85 1018.7 160 215
10 145 24.52 865.8 160 215
12.5 181 22.17 782.82 160 215
DAW-200(W) 7 102 38.12 823.43 200 270 78 3100×1700×2090 3690 DN80
8 116 36.39 1284.9 200 270
10 145 29.81 1052.6 200 270
12.5 181 27.43 968.6 200 270
DAW-250(W) 7 102 43.79 1546.2 250 350 79 3100×1700×2090 3900 DN100
8 116 42.6 1504.2 250 350
10 145 38.75 1368.3 250 350
12.5 181 34.43 1215.7 250 350

*) Specifications are subject to change without prior notice

DENAIR Factory:

At DENAIR, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CHINAMFG has been exporting to more than 90 countries across the globe. We have sales representatives who can speak English, Spanish, French, Russian and Arabic, which makes it easier for our clients from all over the world to interact and negotiate with us. 

 

DENAIR Exhibition

FAQ:

Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2: Our company is located in No. 6767, Tingfeng Rd. Xihu (West Lake) Dis.n District, ZheJiang  201502, China
And our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China. 

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can Water-Lubricated Compressors Be Used in High-Pressure Applications?

Water-lubricated compressors can be used in high-pressure applications, but there are certain considerations and limitations to keep in mind. Here’s a detailed explanation:

Water-lubricated compressors are typically designed for lower to medium-pressure ranges. They are commonly used in applications where the required discharge pressure does not exceed a certain threshold, typically up to a few hundred pounds per square inch (psi). However, there are specialized water-lubricated compressors available that can handle higher pressures, depending on the specific design and construction.

The ability of a water-lubricated compressor to operate at high pressures depends on several factors:

  1. Compressor Design: The design and construction of the compressor play a crucial role in determining its maximum pressure rating. Compressors designed for high-pressure applications need to have robust components, such as reinforced casings, high-strength materials, and proper sealing mechanisms to withstand the elevated pressures. Special attention should be given to the design of the water-lubricated bearing system to ensure it can handle the increased loads and pressures.
  2. Water Supply and Cooling: High-pressure compressors generate more heat during the compression process, requiring efficient cooling mechanisms to maintain safe operating temperatures. Sufficient water supply and cooling capacity must be available to handle the increased heat load. Adequate flow rates, temperature control, and cooling methods, such as water jackets or external cooling systems, may be necessary to prevent overheating and ensure proper lubrication and cooling of the compressor components.
  3. Water Quality: The quality of the water used for lubrication becomes even more critical in high-pressure applications. Any impurities, contaminants, or minerals present in the water can cause increased wear, corrosion, or blockages, jeopardizing the compressor’s performance and reliability. Water treatment or filtration systems may be required to maintain the desired water quality and prevent damage to the compressor.
  4. Sealing and Leakage Control: As the pressure increases, it becomes more challenging to maintain effective sealing and prevent leakage in the compressor system. Proper sealing mechanisms, such as high-quality seals and gaskets, are essential to ensure minimal leakage and maintain the required pressure levels. Adequate monitoring and maintenance of the sealing components are necessary to prevent energy losses and ensure the compressor’s efficiency.

It’s worth noting that for extremely high-pressure applications, water-lubricated compressors may not be the most suitable choice. In such cases, alternative lubrication methods, such as oil or specialized lubricants, are often preferred to handle the extreme pressures and provide adequate lubrication and cooling.

When considering the use of water-lubricated compressors in high-pressure applications, it is crucial to consult with the compressor manufacturer or a qualified engineer to ensure that the chosen compressor model is specifically designed and rated for the desired pressure range. Proper installation, maintenance, and adherence to the manufacturer’s guidelines are essential to ensure the safe and efficient operation of the compressor in high-pressure conditions.

air compressor

How Do Water-Lubricated Air Compressors Compare in Terms of Maintenance Costs?

When comparing water-lubricated air compressors to other types of compressors, there are several factors that can influence the maintenance costs. Here’s a detailed explanation of how water-lubricated air compressors compare in terms of maintenance costs:

Initial Investment:

  • Higher Initial Cost: Water-lubricated air compressors tend to have a higher initial cost compared to oil-lubricated compressors. This is primarily due to the additional components required for the water-lubrication system, such as water pumps, filters, and separators. The higher initial investment can impact the overall cost of the compressor system.

Lubrication System Maintenance:

  • Water Treatment and Filtration: Water-lubricated compressors may require additional maintenance for water treatment and filtration systems. Regular monitoring, maintenance, and replacement of filters or treatment media are necessary to ensure the water quality remains suitable for lubrication. The cost of water treatment and filtration maintenance should be considered in the overall maintenance costs.
  • Water Quality Monitoring: Monitoring the quality of the water used in water-lubricated compressors is crucial. This may involve periodic water analysis, temperature monitoring, and water chemistry checks. The cost of water quality monitoring should be factored into the maintenance costs.

Component Lifespan and Replacement:

  • Extended Component Lifespan: Proper water-lubrication and cooling can contribute to the extended lifespan of compressor components. Reduced friction, effective cooling, and contaminant control can minimize wear and damage to components, leading to lower replacement costs over time. Water-lubricated compressors may have advantages in terms of component longevity, potentially reducing the frequency of component replacements.

Corrosion Prevention:

  • Corrosion Protection Measures: Water-lubricated compressors require corrosion prevention measures due to the presence of water within the system. Corrosion-resistant materials, coatings, or regular maintenance procedures are necessary to prevent corrosion-related issues. The cost of implementing and maintaining corrosion protection measures should be considered in the overall maintenance costs.

Overall, the maintenance costs of water-lubricated air compressors can vary depending on factors such as the specific design and components of the compressor, the quality of the water used, the effectiveness of water treatment and filtration systems, and the implementation of corrosion prevention measures. While water-lubricated compressors may have higher initial costs and additional maintenance requirements, they can potentially offer advantages in terms of extended component lifespan, reduced component replacements, and effective lubrication. It is important to consider these factors and consult the manufacturer’s guidelines to accurately assess the maintenance costs associated with water-lubricated air compressors.

air compressor

Are There Any Downsides to Using Water-Lubricated Air Compressors?

While water-lubricated air compressors offer several advantages, there are also some downsides to consider when using this type of compressor. Here are a few potential drawbacks associated with water-lubricated air compressors:

  1. Water quality requirements: Water-lubricated compressors are highly dependent on the quality of the water used for lubrication. The water should be free from contaminants, minerals, and impurities that can affect the compressor’s performance or cause corrosion. Ensuring the consistent availability of high-quality water may require additional filtration or treatment processes, which can add complexity and cost to the system.
  2. Increased maintenance: Compared to oil-lubricated compressors, water-lubricated models may require more frequent maintenance. Regular checks, cleaning, and monitoring of the water system are necessary to prevent blockages, maintain proper water flow, and ensure the cleanliness of the compressor. This increased maintenance requirement can result in higher operational costs and more downtime for maintenance activities.
  3. Potential for corrosion: While water itself is not corrosive, certain water conditions, such as high mineral content or low pH levels, can promote corrosion within the compressor system. Corrosion can lead to component damage, reduced efficiency, and the need for repairs or replacements. Implementing corrosion prevention measures, such as water treatment or the use of corrosion-resistant materials, may be necessary to mitigate this risk.
  4. Compatibility limitations: Water-lubricated compressors may have limitations when it comes to compatibility with certain materials or gases. For example, in applications where the compressed air comes into contact with sensitive materials or requires specific gas purity, the use of water as a lubricant may not be suitable. In such cases, alternative lubrication methods or compressor types may be more appropriate.
  5. Environmental considerations: While water is generally considered environmentally friendly, the disposal of used water from the compressor system may require proper wastewater management. Depending on local regulations and requirements, additional steps may be needed to ensure compliant and environmentally responsible disposal of the water used for lubrication.

Despite these potential downsides, water-lubricated air compressors continue to be used in various industries and applications due to their specific advantages and suitability for certain environments. It is important to carefully evaluate the specific requirements, operating conditions, and maintenance considerations of a given application to determine whether a water-lubricated compressor is the most suitable choice.

China Custom 90kw 120 HP 12.5bar Oil Free Rotary Screw Air Compressor Manufacturer   manufacturer China Custom 90kw 120 HP 12.5bar Oil Free Rotary Screw Air Compressor Manufacturer   manufacturer
editor by CX 2024-03-18

China manufacturer China Air Screw Pump 75kw 90kw Silent High Pressure Oil Free Low Noise Rotary Screw Type Air Compressor best air compressor

Product Description

Electrical Portable Screw Compressors  – Single-stage screw compression

Product Description

1. Complete variety series, many advantages:
Small size, light weight. Low noise. Stable and reliable performance. Long service life. Easy to maintain. Low maintenance costs. 
2. Technical agglomeration, comprehensive performance of machinery:
This series of products are designed for engineering mines with
φ80-110mm bore drill, anchor drill, all kinds of pickaxes, rock drills, shotguns and all kinds of air sources.
Series of products focus on reliability, robust based on the optimized control system, greatly reducing the energy consumption of products;
The whole series of products adopt the national II/III/IV engine.
3. Close to the actual needs of users:
The complete series of products, the exhaust volume has been from small to large, which meets the needs of air mechanical and gas such as air -drifting machines such as pneumatic rock drills.  There are diverse structures, suitable for different users.  Low-quality, low investment costs.

 

Model and technical parameters  

Model 75SDY-8 90SDY-8S 90SDY-14.5
Air End Single Stage Compression
Type 4 wheel
Motor Protection Class IP54
Rated Pressure 8 bar 8 bar 14.5 bar
Rated FAD 13.2 m³/min 15.5 m³/min 13 m³/min
Motor Power 75 kW 90 kW 90 kW
Weight 2571 kg 2125 kg 2120 kg
Dimensions (LxWxH) 3050×1620×2090 mm

 

 

 

FAQ
Q1: What’s your delivery time?
A: 15 days to produce, within 3 days if in stock.
 
Q2: What’s methods of payments are accepted?
A: We agree T/T ,L/C , West Union ,Money Gram ,Paypal.
 
Q3: What about the shipments and package?
A: 40′ container for 2 sets, 20′ container for 1 set, 
Machine in nude packing, spare parts in standard export wooden box.
 
Q4: Have you got any certificate?
A:We have got ISO,CE certificate.
 
Q5: How to control the quality?
A: We will control the quality by ISO and CE requests.
 
Q6: Do you have after-sale service and warranty service ?
A: Yes, we have.We can supply instruction for operation and maintenance.If necessary, we can send our engineer to repair the machine in your company.
Warranty is 1 year for the machine.
 
Q7: Can I trust your company ?
 A: Our company has been certificated by Chinese government,and verified by SGS Inspection Company.  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online
Lubrication Style: Oil-free
Cooling System: Air Cooling
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Are There Specific Water Treatment Requirements for Water-Lubricated Compressors?

Water-lubricated compressors often have specific water treatment requirements to ensure optimal performance, prevent equipment damage, and maintain the desired water quality. Here’s a detailed explanation of the water treatment considerations for water-lubricated compressors:

Water Quality:

  • Purity: The water used for lubrication should be clean and free from impurities, contaminants, or excessive minerals. Impurities in the water can lead to corrosion, blockages, and reduced lubrication effectiveness. Water sources should be evaluated to ensure they meet the required purity standards.
  • Chemical Composition: The chemical composition of the water should be within acceptable limits to avoid any adverse reactions with compressor components or lubricants. Certain water characteristics, such as pH, alkalinity, hardness, and conductivity, need to be monitored and controlled to prevent issues like scaling, fouling, or chemical reactions.

Water Treatment Methods:

  • Filtration: Filtration systems are commonly used to remove particulate matter, sediment, or debris from the water. Filters can range from simple strainers to more advanced filtration systems, depending on the specific water quality requirements and the level of filtration needed.
  • Water Softening: If the water has high levels of hardness minerals, such as calcium and magnesium, water softening methods may be necessary. Water softeners use ion exchange or other processes to remove the hardness minerals, which can help prevent scaling and reduce the risk of deposits in the compressor system.
  • Reverse Osmosis (RO): Reverse osmosis is a water treatment method that uses a semi-permeable membrane to remove dissolved solids, ions, and impurities from the water. RO systems can effectively reduce the total dissolved solids (TDS) and improve the overall water quality, making it suitable for water-lubricated compressors.
  • Chemical Treatment: In some cases, chemical treatments may be required to control water chemistry parameters, such as pH or alkalinity. Chemical additives can be used to adjust or stabilize water chemistry within the desired range, preventing corrosion, scaling, or other issues.

Water treatment requirements for water-lubricated compressors can vary depending on factors such as the compressor design, operating conditions, water source quality, and specific application requirements. It is essential to consult the compressor manufacturer’s recommendations and guidelines regarding water treatment. The manufacturer’s guidelines will provide specific information on water quality limits, treatment methods, and any required maintenance procedures related to water treatment.

Regular monitoring of water quality, including periodic testing and analysis, is recommended to ensure that the water treatment measures are effective and the desired water quality is maintained. Water treatment systems should be properly maintained and periodically serviced to ensure their optimal performance and prevent any potential issues that could affect the operation and longevity of water-lubricated compressors.

air compressor

Are There Regulations Governing the Use of Water-Lubricated Air Compressors?

When it comes to the use of water-lubricated air compressors, there are several regulations and standards that govern their operation and ensure compliance with safety, environmental, and performance requirements. Here’s a detailed explanation of the regulations related to water-lubricated air compressors:

1. Occupational Safety and Health Administration (OSHA) Regulations:

OSHA is a regulatory agency in the United States that sets and enforces workplace safety and health standards. While OSHA does not have specific regulations solely dedicated to water-lubricated air compressors, they have general regulations that apply to all types of air compressors. These regulations include requirements for safe operation, maintenance, and guarding of equipment to protect workers from hazards such as electrical shocks, mechanical injuries, and exposure to hazardous substances.

2. Environmental Protection Agency (EPA) Regulations:

The EPA is responsible for implementing and enforcing environmental regulations in the United States. Although there are no specific regulations for water-lubricated air compressors, the EPA has regulations that govern the discharge of water and other substances into the environment. If the water-lubricated compressor system involves the use of cooling water or generates wastewater, it may be subject to regulations related to water pollution control, water treatment, and proper disposal of wastewater.

3. International Organization for Standardization (ISO) Standards:

The ISO develops international standards that provide guidelines and requirements for various industries and technologies. ISO 8573 is a standard that addresses the quality of compressed air used in different applications. This standard sets limits and specifications for various contaminants in compressed air, including water content. Water-lubricated air compressors need to comply with the requirements of ISO 8573 to ensure the produced compressed air meets the desired quality standards.

4. Manufacturer Guidelines and Recommendations:

In addition to regulatory requirements, it is essential to follow the guidelines and recommendations provided by the manufacturers of water-lubricated air compressors. Manufacturers typically provide instructions for installation, operation, maintenance, and safety precautions specific to their equipment. Adhering to these guidelines is crucial to ensure the safe and proper functioning of the equipment and to maintain warranty coverage.

It’s important to note that the specific regulations and standards governing water-lubricated air compressors may vary depending on the country or region. Therefore, it is advisable to consult the relevant regulatory agencies, industry organizations, and local authorities to ensure compliance with applicable regulations and standards in a particular jurisdiction.

By complying with the relevant regulations, standards, and manufacturer guidelines, users of water-lubricated air compressors can ensure the safe and efficient operation of their equipment while minimizing any potential environmental impacts.

air compressor

Are Water Lubrication Air Compressors More Environmentally Friendly?

Water lubrication in air compressors offers several environmental benefits compared to traditional lubrication methods. Here are some reasons why water lubrication is considered more environmentally friendly:

  1. Non-toxic and biodegradable: Water is a natural substance that is non-toxic and biodegradable. It does not contain harmful chemicals or additives that can pollute the air or water systems. When water lubricants are used in air compressors, there is a reduced risk of environmental contamination.
  2. Reduced air pollution: Traditional lubricants, such as oils or synthetic lubricants, can release volatile organic compounds (VOCs) into the air during operation. VOCs contribute to air pollution and can have detrimental effects on human health and the environment. Water lubrication eliminates the release of VOCs, resulting in improved air quality and reduced air pollution.
  3. Minimized water pollution: Water lubrication does not introduce additional pollutants into water systems. Unlike oils or synthetic lubricants, water does not leave behind harmful residues or contaminants that can contaminate water sources. This helps to protect aquatic ecosystems and maintain water quality.
  4. Energy efficiency: Water lubrication can contribute to energy efficiency in air compressors. Water has excellent heat transfer properties, allowing for efficient dissipation of heat generated during compressor operation. By effectively managing heat, water lubrication helps to reduce energy consumption and improve overall compressor efficiency.
  5. Sustainable resource: Water is a renewable resource that is readily available in nature. Unlike oil or synthetic lubricants, which require extraction and processing, water can be sourced sustainably. This reduces the reliance on finite resources and promotes a more sustainable approach to lubrication in air compressors.

Overall, water lubrication in air compressors is considered more environmentally friendly due to its non-toxic nature, reduced air and water pollution, energy efficiency, and sustainable resource usage.

China manufacturer China Air Screw Pump 75kw 90kw Silent High Pressure Oil Free Low Noise Rotary Screw Type Air Compressor   best air compressorChina manufacturer China Air Screw Pump 75kw 90kw Silent High Pressure Oil Free Low Noise Rotary Screw Type Air Compressor   best air compressor
editor by CX 2024-03-13

China high quality Manufacturer Direct Supply Oil Free Silent Screw Air Compressor arb air compressor

Product Description

Manufacturer Direct Supply Oil Free Silent Screw Air Compressor

  Our company is a comprehensive screw air compressor manufacturer that engaged in R & D, design, production and sales. It has a plant of 20,000 square meters, including a large production workshop, a comprehensive first-class exhibition hall and a testing laboratory. We have 9 series of products with multiple models. Including Fixed speed air compressor, PM VSD air compressor, PM VSD two-stage air compressor , 4-in-1 air compressor, Oil free water lubrcating air compressor , Diesel portable screw air compressor, Electric portable screw air compressor, Air dryer, Adsorption machine and the matching spare parts. CHINAMFG adheres to the business philosophy of cooperation and mutual benefit to provide a one-stop service for every customer!

Product Parameters&Advantage

                                               

                                              Oil Free Screw Air Compressor 

Advantages of Oil Free air compressor:
 

1.Self-learning function, intelligent start/stop

2.Detect the ambient temperature to prevent the ambient temperature frombeing too high temperature to cause high-temperature failure;

3.Detect the terminal pressure of the post-treatment equipment to effectively prevent the compressed air’s pressure different from being too high to waste electric energy;

4.Detect the motor’s temperature to protect it.

 

 

Type

Oil Free/Water Lubricating/Screw

Working Pressure

8 bar, 12.5 bar, 10 bar,Customized

Configuration Stationary
Lubrication Style Water Lubricating
Voltage 220V/380V/440V/525V
Weight 430-4600kg
Air capacity 0.65M³/Min-43.5M³/Min
Motor power 5.5KW-250KW

OEM/ODM

Accept customization,Voltage/power/horsepower/working pressure/LOGO/Color can be customized

If you are interested in our products, please feel free to contact us !

Parameters:

Product Description

Related Products

 

Multi-configurations screw air compressor can be customized.All-in-1 screw air compressor(2-in-1/4-in-1),stationary/portable screw air compressor,electric/diesel screw air compressor,fixed speed/PM VSD screw air compressor,single phase screw air compressor,two stage PM VSD air compressor and complete accessories.

Company Profile

  ZheJiang CHINAMFG Machinery Manufacturing Co. , Ltd. is located in HangZhou, ZheJiang .CHINAMFG is a comprehensive screw air compressor

manufacturer that engaged in R & D, design, production and sales. It has a plant of 20,000 square meters, including a large production workshop,

a comprehensive first-class exhibition hall and a testing laboratory.

  CHINAMFG has excellent mechanical engineering designers, an experienced staff team and a professional management team. The production

concept focuses on energy-saving and is committed to perfecting and improving the technological process in order to get the core technology

of super frequency energy-saving, achieving the characteristics of mute, durability, power saving and safety.

  The company has 9 series of products with multiple models. Including Fixed speed air compressor, PM VSD air compressor, PM VSD

two-stage air compressor, 4-in-1 air compressor, Oil free water lubrcating air compressor, Diesel portable screw air compressor, Electric

portable screw air compressor, Air dryer, Adsorption machine and the matching spare parts. CHINAMFG adheres to the business philosophy of

cooperation and mutual benefit to provide a one-stop service for every customer!

  CHINAMFG air compressors not only cover the domestic market but also are exported to more than 20 countries and regions such as South

Africa, Australia, Thailand, Russia, Argentina, Canada and so on. CHINAMFG products have won a good reputation from users for their excellent

quality and style. The company has always adhered to the concept of quality first, service first and dedication to providing every customer with

excellent products and meticulous after-sales service!

  CHINAMFG warmly welcome customers to visit our factory and establish a wide range of cooperation!

Certifications

Exhibition

Packaging & Shipping

Customized package for your need.

FAQ

 

Q1: Are you factory or trade company?  

A1: We are factory.

Q2: What the exactly address of your factory? 
A2: Our Factory is Located in Xihu (West Lake) Dis. County, HangZhou CityZheJiang  Province, China.

Q3: Will you provide spare parts of your products? 
A3: Yes, We provide all parts to customer, so you can do repair or maintenance without trouble.

Q4: Can you accept OEM orders? 
A4: Yes, with professional design team, OEM orders are highly welcome.

Q5: How long will you take to arrange production?
A5: Immediate delivery for stock products.380V 50HZ we can delivery the goods within 3-15 days. Other voltage or other color we will delivery within 25-30 days.

Q6: Warranty terms of your machine?
A6: Two years warranty for the machine and technical support always according to your needs.

Q7: Can you provide the best price?
A7:According to your order, we will provide you the best price.
 

Q7:Can the machines you sell provide after-sales service?

A7: For inexperienced customers, we can provide video guidance and technical support services

If you are interested in our products, please contact us promptly! /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24 Hours
Warranty: 2 Years
Lubrication Style: Oil-free
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can Water-Lubricated Air Compressors Be Used in Cold Climates?

Water-lubricated air compressors can be used in cold climates, but there are certain considerations and precautions to keep in mind. Here’s a detailed explanation of using water-lubricated air compressors in cold climates:

Freezing of Water:

  • Potential for Freezing: In cold climates, the water used for lubrication in water-lubricated compressors can freeze, which can cause operational issues and damage to the equipment. Freezing can occur in the water supply lines, lubrication system, or water jackets if the temperature drops below the freezing point of water.
  • Water Temperature: It is important to ensure that the water temperature remains above freezing throughout the compressor system. This can be achieved by using insulation, heat tracing, or heaters to maintain adequate water temperature. Monitoring the water temperature and implementing appropriate heating measures are crucial to prevent freezing-related problems.

Protection and Insulation:

  • Protecting External Components: External components of water-lubricated compressors, such as valves, fittings, and pipes, may be exposed to cold temperatures. Insulating these components can help prevent freezing and ensure their proper functioning. Insulation materials, such as foam wraps or heat tapes, can be used to provide thermal protection.
  • Water Supply Lines: Water supply lines that feed the compressor should be properly insulated and protected from freezing temperatures. Insulation can help maintain the water temperature and prevent freezing within the supply lines. Additionally, measures such as burying the supply lines below the frost line or using heat tracing cables can offer further protection against freezing.

Alternative Lubrication Methods:

  • Oil-Lubricated Compressors: In extremely cold climates, where freezing is a significant concern, using oil-lubricated compressors instead of water-lubricated ones may be a more practical option. Oil-based lubrication systems are less prone to freezing and can provide reliable operation in colder temperatures. However, it is important to consider the specific requirements and limitations of oil-lubricated compressors for the intended application.

Manufacturer Recommendations:

  • Consulting the Manufacturer: It is crucial to consult the manufacturer’s guidelines and recommendations regarding the use of water-lubricated compressors in cold climates. Manufacturers may provide specific instructions, modifications, or alternative solutions to ensure the safe and efficient operation of their equipment under cold weather conditions.

By implementing proper insulation, heating measures, and following the manufacturer’s guidance, water-lubricated air compressors can be used effectively in cold climates. It is important to assess the specific requirements of the application and consider the potential challenges associated with freezing temperatures to ensure the reliable and safe operation of the water-lubricated compressor system.

air compressor

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Filtration plays a crucial role in water-lubricated air compressors, serving several important purposes. Here’s a detailed explanation of the role of filtration in water-lubricated air compressors:

Contaminant Removal:

  • Particle Filtration: Filtration systems in water-lubricated air compressors are designed to remove particles and contaminants from the water. These can include sediment, rust, debris, and other solid particles that may be present in the water supply. Removing these contaminants is essential to prevent blockages, clogging, and damage to the compressor components.
  • Oil Removal: In some cases, water used in compressors may contain traces of oil or hydrocarbons. Filtration systems can also help remove oil and hydrocarbon contaminants from the water, ensuring that the lubrication system remains clean and effective.

Protection of Components:

  • Lubrication System: Filtration prevents contaminants from reaching the lubrication system of water-lubricated air compressors. This helps maintain the cleanliness and integrity of the lubricant, ensuring optimal lubrication performance and minimizing wear on the compressor’s moving parts. Clean and filtered water can enhance the efficiency and lifespan of the compressor’s lubrication system.
  • Heat Exchangers and Cooling Systems: Water-lubricated compressors often rely on heat exchangers and cooling systems to regulate the temperature of the compressed air and the compressor itself. Filtration helps protect these components by preventing the accumulation of debris and contaminants that can hinder heat transfer and reduce the cooling efficiency. Clean water free from particles and contaminants promotes effective heat exchange and cooling.

Prevention of System Fouling:

  • Scaling and Deposits: Filtration systems also help prevent scaling and deposits that can occur when water with high mineral content or hardness is used. These deposits can accumulate on the internal surfaces of the compressor, heat exchangers, or other components, reducing their efficiency and potentially causing operational issues. By removing impurities and controlling mineral content, filtration minimizes the risk of scaling and deposits.

Extended Equipment Lifespan:

  • Component Protection: By effectively removing contaminants, filtration systems contribute to the protection and longevity of water-lubricated air compressor components. Clean and filtered water reduces the risk of component wear, corrosion, fouling, and blockages, ultimately extending the lifespan of the compressor and reducing maintenance and replacement costs.

Regular Maintenance and Monitoring:

  • Filter Replacement: Filtration systems require regular maintenance, including the replacement or cleaning of filters. The frequency of filter replacement depends on factors such as water quality, usage conditions, and the specific requirements of the compressor manufacturer. Regular maintenance ensures that the filtration system continues to effectively remove contaminants and protect the compressor components.
  • Monitoring Water Quality: Alongside filtration, monitoring the quality of the water used in water-lubricated compressors is essential. This can involve periodic water analysis, measurement of key parameters such as pH or conductivity, and visual inspections. Monitoring helps identify any changes in water quality or potential issues with the filtration system, allowing for timely maintenance or corrective actions.

In summary, filtration plays a critical role in water-lubricated air compressors by removing contaminants, protecting components, preventing system fouling, and extending equipment lifespan. By maintaining clean and filtered water, filtration systems contribute to the efficient operation, reliability, and longevity of water-lubricated compressors.

air compressor

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Water-lubricated air compressors can be highly suitable for the food and beverage industries due to several reasons:

  1. Food-grade lubrication: Water is a natural and food-grade lubricant. It does not introduce harmful contaminants or chemicals into the production process, ensuring the safety and quality of food and beverage products. Water lubrication eliminates the risk of oil contamination in food products that can occur with oil-lubricated compressors.
  2. Compliance with hygiene standards: The food and beverage industries have strict hygiene standards and regulations. Water-lubricated air compressors align with these standards as water is a clean and sanitary lubricant. It minimizes the risk of cross-contamination and helps maintain a hygienic production environment.
  3. Reduced risk of product contamination: Water lubrication eliminates the possibility of oil carryover or oil vapor entering the compressed air system. This reduces the risk of oil contamination in food and beverage products, ensuring their purity and quality.
  4. Improved product shelf life: Oil-lubricated compressors can release oil aerosols or vapors that may negatively affect the taste, odor, or quality of food and beverage products. Water-lubricated compressors eliminate this concern, contributing to improved product shelf life and maintaining the desired sensory attributes.
  5. Easy cleanup and maintenance: Water lubrication simplifies cleanup and maintenance procedures in food and beverage production facilities. Water does not leave behind sticky residues or require extensive cleaning processes. It facilitates faster and more efficient cleaning, reducing downtime and improving overall productivity.
  6. Environmental friendliness: Water is a sustainable and environmentally friendly lubricant choice. It is non-toxic, biodegradable, and does not contribute to air or water pollution. Using water-lubricated air compressors aligns with the sustainability goals of the food and beverage industries.

Considering these factors, water-lubricated air compressors are well-suited for the food and beverage industries, ensuring compliance with hygiene standards, preventing product contamination, and promoting a safe and sustainable production environment.

China high quality Manufacturer Direct Supply Oil Free Silent Screw Air Compressor   arb air compressorChina high quality Manufacturer Direct Supply Oil Free Silent Screw Air Compressor   arb air compressor
editor by CX 2024-03-09

China factory Glades China Air Screw Pump 20HP 15kw Silent High Pressure 15kw Oil-Less Low Noise Rotary Screw Type Air Compressor manufacturer

Product Description

Glades China Air Screw Pump 20HP 15kw Silent High Pressure 15kw Oil-less Low Noise Rotary Screw Type Air Compressor

Motor
The motor with protection class IP54is used, the insulation class is F grade,and the bearing is made of SwedishSKF heavy bearing.

Air end
Adopting twin-screw main engine, largerotor and low speed design, new 5:6asymmetric rotor tooth profile, brandbearing, determines the excellent performance of the whole machine.

Intake valve
The red star intake valve can automaticallyadjust the gas volume according to the requirements of the system gas consumption,reducing operating costs.

MPV

Made of aluminum, it has outstanding antirust performance. With check function.The stable setting of the opening pressureensures that sufficient circulation pressureis established in the system to ensure lubrication of the machine body.

 

Cooling system
Feature:Large cooler system
Advantage:Axial flow Fan used forgood cooling effect
Benefit:Allow ambient temperature at 52″C.

Smart display screen
Feature:Intelligent control systemAdvantage:10 inch monitor to showall the date
Benefit:Simple operation and trouble free

Oil and gas separator
With the Apuda oil and gas separator,the rigorous oil and gas separationfilter can reduce the oil content of theexhaust gas in the compressor andthe fuel   consumption of the unit.

The durable pipe system
The galvanized pipe is more durable, sturdy, longer, longer, and durable.

 

Specification
Model Working Pressure Air Delivery Motor Power Type of Driving Type of Cooling Dimension(mm) Weight Output pipe
psig bar cfm m3/min kw/hp L W H (kg) Diameter
GLDS-10A 100 7 38.8 1.1 7.5/10 Driect driven Air Cooling 850 650 800 240 3/4″
116 8 35.3 1
145 10 30 0.85
181 12.5 24.7 0.7
GLDS-15A 100 7 63.6 1.8 11/15 1050 700 1000 450 3/4″
116 8 58.3 1.65
145 10 53 1.5
181 12.5 45.9 1.3
GLDS-20A 100 7 84.7 2.4 15/20 1050 700 1000 450 3/4″
116 8 77.7 2.2
145 10 74.2 2.1
181 12.5 63.6 1.8
GLDS-25A 100 7 109.5 3.1 18.5/25 1250 850 1100 620 1″
116 8 102.4 2.9
145 10 95.3 2.7
181 12.5 81.2 2.3
GLDS-30A 100 7 134.2 3.8 22/30 1250 850 1100 620 1″
116 8 127.1 3.6
145 10 113 3.2
181 12.5 88.3 2.5
GLDS-40A 100 7 187.1 5.3 30/40 1350 850 1040 680 1-1/2″
116 8 176.6 5
145 10 151.8 4.3
181 12.5 127.1 3.6
GLDS-50A 100 7 233 6.6 37/50 1550 1571 1330 850 1-1/2″
116 8 218.9 6.2
145 10 201.3 5.7
181 12.5 162.4 4.6
GLDS-60A 100 7 282.5 8 45/60 1550 1571 1330 850 1-1/2″
116 8 271.9 7.7
145 10 243.6 6.9
181 12.5 211.9 6
GLDS-75A 100 7 370.8 10.5 55/75 1950 1270 1620 1800 2″
116 8 346 9.8
145 10 307.2 8.7
181 12.5 257.8 7.3
GLDS-100A 100 7 480.2 13.6 75/100 1950 1270 1620 1900 2″
116 8 459 13
145 10 399 11.3
181 12.5 356.6 10.1
GLDS-125A 100 7 572 16.2 90/125 2450 1600 1740 1950 2″
116 8 543.8 15.4
145 10 466.1 13.2
181 12.5 395.5 11.2
Motor Efficiency Class:   Ultraefficient/IE3/IE2 as per your required
Motor Protection Class:   IP23/IP54/IP55 or as per your required
Certification:  CE/ISO9001
Voltage:  380V/3PH/50HZ/60HZ,   220V/3PH/50HZ/60HZ,   400V/3PH/50HZ/60HZ,   440V/3PH/50HZ/60HZ,   415V/3PH/50HZ/60HZ,   230V/3PH/50HZ/60HZ,  dual voltage is also ok

Equipment manufacturing industry: spray painting, spray washing machine, mechanical retreat mold, driving the assembly tools, drilling machine, hammer, lifting driving, combined tools, reamer, run run run, riveter screwdriver rotary drive, forging, metal forming press run operation, blasting, spraying, transmission, driving technology process.
Automobile manufacturing industry: spray cleaning parts, driving the assembly tool, fixture tools, lifting hoist crane, pneumatic control, forging hammer pressing workshop, casting workshop, metal workshop blast spray.
Beverage factory: running, bottle washing machine barrel turn, cHangZhou machine internal spraying, cleaning, food industrial used gas drying bottle, automatic operation, ash dust.
Cement manufacturing: Lime storage ventilation, cement slurry stirring and driving, cement bag clean sealing driving, raw material mixing, tipper operation, cleaning equipment, clinker cooling, conveying of cement and coal, cement kiln cleaning, vehicle and vessel handling, lifting and hoisting device, pneumatic control.
Chemical plant: ventilation and mixing, separation tower with gas, cleaning equipment, combustion gas, transportation, lifting liquid, spraying and cleaning pipe, pneumatic control, process gas, liquid transport.
Power plant: air cleaning pipeline, blowing smoke scale, cleaning of boiler and condenser pipe, jet cleaning, coal, sewage removal transmission, pneumatic control.
Hydropower plant maintenance: engine control, lock, drive controller, drive lubrication pump, driving lock, starting control, cleaning rubbish net.
The food industry (general application): mixing liquid, fermentation tank with gas (oxygen), cleaning equipment, with nozzle with nozzle cleaning container transport, food, raw materials, filtration dehydration.
Forging shop: oxygen skin, door, air curtain lifting hoist and hoist, driving the bending and straightening machine, driving clutch brake and a clamping device, the driving hammer, drive the fuel regulator.
Casting: hot metal car positioning, cleaning equipment, transporting sand, drive pneumatic tools, ramming machine, grinding machine, lifting hoist and elevator, pneumatic pick, tamping machine, steel than the brush, sandblasting, sieve sand, mud core.
Glass factory: blow bottle and glass, blow lamp and electronic tube, combustion gas, raw material, light transmission glass etching and drilling, conveying the glass, pneumatic control, vacuum hanging board.
Iron and steel plant: stirring the solution, oxygen with gas, HangZhou gas, converter with skip positioning, a sediment chamber drilling, unloading bags, open hearth CHINAMFG flue cleaning, driving clutch and brake, drive door, driving loading and transporting device, drive lubrication system, drive pneumatic tools, pneumatic pick, grinding wheel machine, lifting hoist and hoist, sandblasting, blast furnace, vacuum degassing furnace.
Wood, furniture processing: spray cleaning, gas lifting, bending, straightening, disseminated wood clamping clamp, pneumatic tools, carving tools, drilling machine, polishing machine, polishing machine, sand blasting, spray painting, spray device.
Sheet metal workshop: stirring the solution, transportation, jet cleaning, drive chip packaging press, driving plate chuck clutch and positioner, pneumatic tools, pneumatic pick, finishing hammer, drill, grinding wheel machine, crane and elevator, combination tools, riveting machine, sand blasting, spray, spray paint, lubricant container leakage detecting.
The mine ventilation gas, drilling: big hole, gas water removal, filtration fine crumbs, pneumatic hoist driven rock drill rig,,, blow hole, piling machine, drilling machine.
Oil refinery: combustion gas, emptying and cleaning oil, crane and elevator, drive control system, catalyst recycle, sandblasting, painting.
Papermaking factory: clean air equipment, crane and hoist, pool anti icing, roll feeding, pressing paper products, drive clutch, drive off paper machine, paper feeding through the machine, pneumatic control, pressure head box, demolition, removal of waste paper head box, vacuum drying.
Pharmaceutical manufacturers: mixing liquid, antibiotic fermentation with gas (oxygen), transmission of raw materials, raw materials, mixing and stirring driven, pneumatic control, air jet pulverization, spray drying, vacuum drying and vaporization of liquid, transmission.
Plant maintenance: jet cleaning, drive tools (hammer, concrete vibrator, drill, grinding wheel machine, crane, paving stone machine, riveter, oxide skin to wrench, winding machine, sand blasting, spray), metal, spray, spray system.
Textile factory: mixing liquid, gas lifting, moist, operation pressure accumulator, spray, spray system, transfusion.
Rubber factory: clean mold and mechanical devices, gas lifting, demoulding, mold, pneumatic control, spraying.

ZheJiang GLADES MACHINERY EQUIPMENT CO.,LTD.is located in HangZhou -logistics city , with the advantage of rapid transportation of goods. The company covers an area  of more than 20 thousand square meters.with an annual output value of 6 million US dollars and fixed assets more than 10 million US dollars.

Glades’s primary businesses focus in following key areas:Oil-injected rotary screw compressors (Fixed speed and variable speed; normal and low pressure),Oil free screw air compressors (Scroll type, dry type, water-lubricated type),Energy Saving Screw Air Compressor(PM VSD screw air compressor,Two Stage Screw Air Compressor,Scroll screw air compressor),Portable screw air compressors ( electric motor powered),Air treatment equipment (Air dryers, air filters and air receiver tank) .At Glades, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. Glades has been exporting to more than 35 countries across the globe.
Upholding the core concept of “Reliable Carrying Trust”, ZheJiang Glades strives to provide the most reliable products and services through continuous innovation, so that customers can continue to obtain the maximum value for their returns.
Advantages:
Large displacement: Displacement 10% higher than ordinary piston compressor.
Energy-saving: Compared with piston air compressor, this series of models for the new national standard 2 energy efficiency products, excellent energy saving.
Easy to operate: 24 hours unattended all day work, free load automatically start, full load automatically shut down.
Strong stability:Under long time working, displacement and pressure stable, no crash phenomenon, low failure rate.

FAQ:
Q1:Where is your factory located?
A:Our factory is located in HangZhou city which nears HangZhou port about 2 hours.

Q2:How many air compressors do you produce everyday?
A: We can produce 100 pieces everyday.

Q3: Can you use our brand?
A: Yes, OEM/ODM is available.

Q4:How about your after-sales service?
  a.Provide customers with installation and commissioning online instructions. 
  b.Well-trained engineers available to overseas service. 
  c.CHINAMFG agents and after service available.

Q5:What’s your delivery time?
Generally 15 to 20 days, if urgently order, pls contact our sales in advance.

Q4: Why should I choose you?
1. 24/7 after sales service support in different languages;
2. Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center;
3. Technical training for customers in Glades air compressor factory or working site;
4. Plenty of original spare parts with proven quality are all available.

5.All kinds of technical documents in different languages.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24 Hours Online Service
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Customization:
Available

|

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

Air compressors are used to supply compressed air for the combustion process in power generation. In fossil fuel power plants, such as coal-fired or natural gas power plants, compressed air is required to deliver a steady flow of air to the burners. The compressed air helps in the efficient combustion of fuel, enhancing the overall performance and energy output of the power plant.

2. Instrumentation and Control:

Air compressors are utilized for instrumentation and control systems in power generation facilities. Compressed air is used to operate pneumatic control valves, actuators, and other pneumatic devices that regulate the flow of steam, water, and gases within the power plant. The reliable and precise control provided by compressed air ensures efficient and safe operation of various processes and equipment.

3. Cooling and Ventilation:

In power generation, air compressors are involved in cooling and ventilation applications. Compressed air is used to drive air-operated cooling fans and blowers, providing adequate airflow for cooling critical components such as generators, transformers, and power electronics. The compressed air also assists in maintaining proper ventilation in control rooms, substations, and other enclosed spaces, helping to dissipate heat and ensure a comfortable working environment.

4. Cleaning and Maintenance:

Air compressors are employed for cleaning and maintenance tasks in power generation facilities. Compressed air is utilized to blow away dust, dirt, and debris from equipment, machinery, and electrical panels. It helps in maintaining the cleanliness and optimal performance of various components, reducing the risk of equipment failure and improving overall reliability.

5. Pneumatic Tools and Equipment:

In power generation plants, air compressors provide the necessary compressed air for operating pneumatic tools and equipment. These tools include impact wrenches, pneumatic drills, grinders, and sandblasting equipment, which are utilized for installation, maintenance, and repair tasks. The high-pressure air generated by compressors enables efficient and reliable operation of these tools, enhancing productivity and reducing manual effort.

6. Nitrogen Generation:

Sometimes, air compressors are used in power generation for nitrogen generation. Compressed air is passed through a nitrogen generator system, which separates nitrogen from other components of air, producing a high-purity nitrogen gas stream. Nitrogen is commonly used in power plant applications, such as purging systems, blanketing in transformers, and generator cooling, due to its inert properties and low moisture content.

7. Start-up and Emergency Systems:

Air compressors are an integral part of start-up and emergency systems in power generation. Compressed air is utilized to power pneumatic starters for gas turbines, providing the initial rotation needed to start the turbine. In emergency situations, compressed air is also used to actuate emergency shutdown valves, safety systems, and fire suppression equipment, ensuring the safe operation and protection of the power plant.

Overall, air compressors contribute to the efficient and reliable operation of power generation facilities, supporting combustion processes, control systems, cooling, cleaning, and various other applications critical to the power generation industry.

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

Can air compressors be used for automotive applications?

Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

China factory Glades China Air Screw Pump 20HP 15kw Silent High Pressure 15kw Oil-Less Low Noise Rotary Screw Type Air Compressor   manufacturer China factory Glades China Air Screw Pump 20HP 15kw Silent High Pressure 15kw Oil-Less Low Noise Rotary Screw Type Air Compressor   manufacturer
editor by CX 2024-02-06

China manufacturer New Design Water Cooled CHINAMFG Twin Screw Air Compressor air compressor price

Product Description

REDUCE ENERGY CONSUMPTION

Under different conditions,the demand for gas will float.Through a large number of research and calculation of marketdemandCha nun confirmed it.Only about 10% of applications require stable air supplyTherefore,frequency conversioncompressor can play a greater role in energy saving.
Energy cost often accounts for 70% of the life cycle cost of a compressor. The production of compressed air may account for 40% of all electricity costs in the plant.In almost every factory,the gas consumption will vary with different time periods,with its high and low CHINAMFG periods. permanent magnet variable frequency screw air compressor can supply glass completely according to the requirements of gas consumption,which can not only save a lot of energy, but also protect theenvironment for future generations.
INTERIOR STRUCTURE

CUSTOM OIL
COOLED MOTOR
First-stage energy-efficient motor,Low Noise,IP65 protection grade

 

AUTOMOTIVE GRADE
PERMANENT MAGNET MOTOR
IE4 high efficiency permanent magnet motor.
AUTOMOTIVE PERMANENT MAGNET MOTOR ForN38UH high grade permanent magnet, IP67 protection grade, and fully enclosed structure uniquevacuum epoxy dipping paint,effectively guaranteeing the stable operation of unit.

 

CHANUN
CUSTOM CONVERTER
Permanent magnet variable-frequency conversion technology, wide voltage. energy-saving ,with a small impact on the power grid.

 

7 INCH TOUCH SCREEN

Large touch screen.all-round protection monitoring with functions of motor start/stopcontrol, operation control:reversal protection of air compressor: and multi-point temperature detection and control protection.

 

HIGH MOBILITY (OPTIONAL)

Easy and flexible to rotate. so that the air compressor is able to move conveniently andquickly (optional)

ZheJiang CHINAMFG Machinery Manufacturing Co. , Ltd. is located in HangZhou, ZheJiang .CHINAMFG is a comprehensive screw air compressor manufacturer that engaged in R & D, design, production and sales. It has a plant of 20,000 square meters, including a large production workshop,a comprehensive first-class exhibition hall and a testing laboratory.
 

CHINAMFG has excellent mechanical engineering designers, an experienced staff team and a professional management team. The production concept focuses on energy-saving and is committed to perfecting and improving the technological process in order to get the core technology of super frequency energy-saving, achieving the characteristics of mute, durability, power saving and safety.

The company has 9 series of products with multiple models. Including Fixed speed air compressor, PM VSD air compressor, PM VSD two-stage air compressor, 4-in-1 air compressor, Oil free water lubrcating air compressor, Diesel portable screw air compressor, Electric portable screw air compressor, Air dryer, Adsorption machine and the matching spare parts.

Dukas adheres to the business philosophy of cooperation and mutual benefit to provide a one-stop service for every customer!
 

CHINAMFG air compressors not only cover the domestic market but also are exported to more than 20 countries and regions such as South Africa, Australia, Thailand, Russia, Argentina, Canada and so on.
Dukas products have won a good reputation from users for their excellent quality and style. The company has always adhered to the concept of quality first, service first and dedication to providing every customer with excellent products and meticulous after-sales service!
 

Dukas warmly welcome customers to visit our factory and establish a wide range of cooperation!

Frequency Asked Question:

Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2: Our Factory is Located in Xihu (West Lake) Dis. CountyHangZhou CityZheJiang  Province, China.

Q3: Will you provide spare parts of your products? 
A3: Yes, We provide all parts to customer, so you can do repair or maintenance without trouble.

Q4: Can you accept OEM orders? 
A4: Yes, with professional design team, OEM orders are highly welcome.

Q5: How long will you take to arrange production?
A5: Immediate delivery for stock products.380V 50HZ we can delivery the goods within 3-15 days. Other voltage or other color we will delivery within 25-30 days.

Q6: Warranty terms of your machine?
A6Two years warranty for the machine and technical support always according to your needs.

Q7: Can you provide the best price?
A7:According to your order, we will provide you the best price. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24 Hours
Warranty: 2 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Customization:
Available

|

air compressor

How are air compressors utilized in the aerospace industry?

Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

1. Aircraft Systems:

Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

2. Ground Support Equipment:

Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

3. Component Testing:

Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

4. Airborne Systems:

In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

5. Environmental Control Systems:

Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

6. Engine Testing:

In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

7. Oxygen Systems:

In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

air compressor

Are there differences between single-stage and two-stage air compressors?

Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:

Compression Stages:

The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.

Compression Process:

In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.

Pressure Output:

The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.

Efficiency:

Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.

Intercooling:

Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.

Applications:

The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.

It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.

In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

China manufacturer New Design Water Cooled CHINAMFG Twin Screw Air Compressor   air compressor priceChina manufacturer New Design Water Cooled CHINAMFG Twin Screw Air Compressor   air compressor price
editor by CX 2024-01-15